PureBasic Forums - English

Posted: **Mon Nov 26, 2007 1:51 am**

Hi,

What is FastBackup ?

FastBackup is a Resources-friendly backup software.
I.e.: You must only once create a MainBackup and the next
backups will contains only the changes. (Incremental)
Therefore you can create many backups and your HardDisk
will never be to full.

The features in overlook:

- Resources-friendly backups of your data. (Incremental)
- Backup and Restore panel available.
- Views of contains from all backups is possible.
- In front of the backup-size will shown a "+" from backup-updates. so you can see exactly how many bytes is added in the last update.
- Delete of no longer required backups. (Delete of the last update)
- Size & (Creations) date of backups will display in panel.
- Multilingual catalogs available. (Currently German & English)

FB Image

Download FastBackup

Posted: **Thu Dec 13, 2007 7:57 pm**

V1.2

- Again some small optimizations in Restore & ListBackup processes.

Posted: **Thu Dec 13, 2007 8:10 pm**

Looks like a very useful utility.

Thanks

Posted: **Thu Dec 13, 2007 8:40 pm**

Thank you AL. I use a folder comparer i made, but this one deserves to be tested and used.

Posted: **Thu Dec 13, 2007 11:05 pm**

Any command line options? Would be nice to allow automated backups.

Posted: **Sat Dec 15, 2007 4:17 am**

Hi all,

Thanks for feedback.

Here now a new version.

v1.3

- Added Commandline parameters.
- Some bugfixes.

Download

Posted: **Sat Dec 15, 2007 6:37 am**

Thanks AL! Job well done.

Posted: **Thu Jan 17, 2008 1:16 am**

Here now again a small update. Now with a optimization in Pack-Speed.
Backup processes will now run ca. 30%(+) faster.

v1.4

- Some optimizations in Backup-Process.

Download

Posted: **Fri Jan 25, 2008 10:01 pm**

Again a small update.

v1.5

- Options will now open automatically on first start.
- GUI is now centered in CMD-Mode.

Download

Posted: **Wed Feb 13, 2008 8:39 pm**

Now added to the DeveloperTools section on www.PureArea.net too!

Posted: **Thu Feb 14, 2008 1:53 am**

Andre wrote:Now added to the DeveloperTools section on www.PureArea.net too!

Superb. Thanks you.

Posted: **Sat Nov 21, 2009 9:45 pm**

Hi All,

A long time ago I've released the latest version. Now is again a new version (1.6) available.

V1.6

- Added more Packer-Engines. (PureCrunch, JCalG1, ZLIB)
- Backup contains will now no longer view recursive in lister. Now you can click step by step in folders.
- All operations will now run 50%+ faster, because the CRC-Check is rewritten and uses now the internal PB-Commands.
- Many small optimizations.

FastBackup supports currently English & German language.

English.catalog
German.catalog

More languages are welcome. (See in the Catalogs-Folder)

Click here for an older pic with English-GUI

Download FastBackup v1.6

Posted: **Sat Nov 21, 2009 10:39 pm**

Hi AL90,

Nice work, adopted for me !

Here is the French catalog for Fast Backup :

; French Catalog by Gaëtan GAUME (zorg77127 (at) yahoo (dot) fr)

[CATALOG]

001 = Sélectionnez un chemin source!
002 = Préférences
003 = Sauver le dossier
004 = Changer
005 = Espace disponible sur le lecteur :
006 = OK
007 = Annuler
008 = Choisissez un répertoire de sauvegarde pour les backups
009 = Projet
010 = A propos
011 = Quitter
012 = Backup
013 = Disque / Chemin
014 = Taille
015 = Dernière mise à jour
016 = Créer
017 = Créer un nouveau backup !
018 = Mettre à jour
019 = Mettre à jour un backup disponible!
020 = Visualiser
021 = Visualiser le contenu d'un backup!
022 = Supprimer
023 = Supprimer le dernier backup créé!
024 = Restaurer
025 = Date de création
026 = Restaurer
027 = Restaurer un backup disponible!
028 = Traitement annulé... Veuillez patienter !
029 = Création du backup...
030 = Demande
031 = Le backup existe déjà, voulez vous l'écraser ?
032 = Info
033 = Une erreur est survenue. Impossible de créer le backup
034 = Traitement annulé !
035 = Vérification des données...
036 = Veuillez choisir un chemin de destination !
037 = Restauration du backup...
038 = Le fichier %FILE% existe déjà, voulez vous l'écraser ?
039 = Une erreur est survenue. Impossible de restaurertous les fichiers de votre backup.
040 = Etes vous sûr de supprimer le backup sélectionné ?
041 = Backup-Contenu
042 = Nom
043 = CRC32
044 = Fermer
045 = Restauration des paramètres
046 = Appliquer à la structure complète du répertoire
047 = Appliquer uniquement aux sous répertoires
048 = Contrôle du backup
049 = Contrôle du backup en cours...
050 = Le backup est valide!
051 = Le backup est corrompu!
052 = Temps total estimé
053 = Temps écoulé
054 = Temps restant
055 = En cours
056 = Inconnu
057 = Seconde(s)
058 = Minute(s)
059 = Heure(s)
060 = Calcul de la liste...
061 = Parent
062 = <Racine>
063 = Dossiers
064 = Moteur de compression
065 = Moteur
066 = PackLevel
067 = PureCrunch
068 = JCalG1
069 = ZLIB

Thanks !

Posted: **Sat Nov 21, 2009 11:22 pm**

Hello GG,

GG wrote:Here is the French catalog for Fast Backup

Superb. That was very fast.

I will it add in 1.7. Thanks for your support.

Posted: **Sun Nov 22, 2009 10:13 am**

AL90,
Hello & Congratulations.
Here is a new one, in Spanish:

Code: Select all

; Catálogo Español por Joaquin Alcañiz (jqn@tcseries.com)

[CATALOG]

001 = Por favor, elija una carpeta origen!
002 = Preferencias
003 = Grabar carpeta
004 = Cambiar
005 = Espacio disponible en disco:
006 = OK
007 = Cancelar
008 = Por favor elija un destino para la copia
009 = Proyecto
010 = Acerca de
011 = Salir
012 = Copia
013 = Disco/Carpeta
014 = Tamaño
015 = Última actualización
016 = Crear
017 = Crear una nueva copia!
018 = Actualizar
019 = Actualizar una copia anterior!
020 = Vista
021 = Vista de contenido de una copia!
022 = Eliminar
023 = Eliminar le última copia creada!
024 = Restaurar
025 = Fecha de Creación
026 = Restaurar
027 = Restaurar una copia anterior!
028 = Proceso cancelado ... espere, por favor!
029 = Creando copia...
030 = Solicitud
031 = La copia ya existe, ¿desea sustituirla?
032 = Información
033 = Ha ocurrido un error, no se puede crear la copia.
034 = El procesò ha sido cancelado!
035 = Verificando datos...
036 = Por favor, elija una carpeta destino!
037 = Restaurando copia...
038 = El fichero %FILE% ya existe, ¿desea sustituirlo?
039 = Ha ocurrido un error. no se pueden restaurar todos los ficheros de la copia.
040 = ¿Está seguro de eliminar la copia seleccionada?
041 = Copia-Contenido
042 = Nombre
043 = CRC32
044 = Cerrar
045 = Restaurar parámetro
046 = Aplicar a la estructura de directorio completa
047 = Aplicar sólamente los a subdirectorios
048 = Comprobar copia
049 = Comprobando copia...
050 = La copia es válida!
051 = La copia está estropeada!
052 = Tiempo total estimado
053 = Tiempo transcurrido
054 = Tiempo restante
055 = Progreso
056 = Desconocido
057 = Segundo(s)
058 = Minuto(s)
059 = Hora(s)
060 = Creando la lista...
061 = Superior
062 = <Raíz>
063 = Carpetas
064 = Motor de compresión
065 = Motor
066 = Nivel de compresión
067 = PureCrunch
068 = JCalG1
069 = ZLIB

PureBasic Forums - English

Fast Backup - a Resources-friendly backup solution!

Fast Backup - a Resources-friendly backup solution!

Re: Fast Backup - a Resources-friendly backup solution!

Re: Fast Backup - a Resources-friendly backup solution!

Re: Fast Backup - a Resources-friendly backup solution!

Re: Fast Backup - a Resources-friendly backup solution!