I2C and a Dallas temperature sensor at the serial port

[infratec]

Hi,

since I did't find anything about I2C in the forum and it is not mentioned in the original topic,
I thought it will be a good idea to make a hint to

http://www.purebasic.fr/english/viewtop ... 6&start=15

There you can find a I2C implementation over the serial port.
A Dallas DS1631 I2C temperature sensor is handled by this code.

Best regards,

Bernd

I hope CrazyFrog112 has nothing against this topic

[CrazyFrog112]

I have nothing against this

[jamba]

great!
I see I2C in my future...so thanks for posting the link!

[infratec]

Hi,

here you can find the hardware which will fit the software



I hope that this 'graphic' link is allowed.

Simply use a DS1631 instead of U1
Remove U2 and C4

That's all.

Bernd

[CrazyFrog112]

Or you can use this version ( the one I've built ). It powers directly from USB port and the component-list is smaller.
You can add up to 8 sensors in parallel-conection.



The project I'll be working in couple of weeks is for a thermometer that uses 1-wire technology and I will try to translate some codes again.

[User_Russian]

It powers directly from USB port and the component-list is smaller.

Maybe once a temperature sensor connected to the bus USB?
An example can be found here
PC program written in PureBasic