PureBasic Forums - English

Posted: **Wed Jan 17, 2024 12:49 pm**

Hi #PB_All,
I downloaded the repo of the PureBasic IDE and wanted to compile it. It's, of course, much more complex than all of my project I have created until now. However, I have problems building it:

When running the "MakeWindows.cmd" there seems to be a mistake in line 61. The folder should be the same as in line 60???

The command on line 69 fails with "The compiler version string has changed and the parsing will be wrong. Exiting". What can I do to at this point? I'm using 6.10 Beta 2.

Posted: **Wed Jan 17, 2024 2:48 pm**

1.
Create a copy of the Purebasic program folder for your version
2.
Call BuildEnv.cmd [path to your purebasic program folder]

Posted: **Wed Jan 17, 2024 3:44 pm**

MakeWindows.cmd does not support paths with spaces.
Make sure the path you provide is writable. It will overwrite the PureBasic.exe.

Also be careful with 6.10 Beta 2, it has broken Unicode support.
So no special characters in any path, not even in windows temp folder.

Posted: **Wed Jan 17, 2024 4:48 pm**

A step-by-step tuto on how I built it with my modified batches (menu, additional controls, messages) to make building easier.

Sample folder here D:\PureBasic_Opensource

1.) Download Build_Tool.zip in D:\PureBasic_Opensource folder

2.) Download, rename PureBasic_Windows_beta2_X64_6.10.exe from https://www.purebasic.com/ portal in D:\PureBasic_Opensource folder
if you need to build the x86 IDE, Download, rename PureBasic_Windows_beta2_X86_6.10.exe

3.) Download PureBasic open source: purebasic-devel.zip in D:\PureBasic_Opensource folder

4.) Extract purebasic-devel.zip here, with 7zip or others

5.) Extract Build_Tool.zip here and confirm file replacement (BuildEnv.cmd, 2 * MakeWindows.cmd)

6.) Drag'n drop PureBasic_Windows_beta2_X64_6.10.exe over Extract_Portable_PureBasic.cmd
To create a portable version from PureBasic_xxx.exe Inno Setup.

You should have:

You're ready to build the IDE

7.) Open purebasic-devel folder and Drag'n drop PureBasic_Windows_beta2_X64_6.10 folder over purebasic-devel\BuildMenu.cmd
Or Open purebasic-devel\BuildMenu.cmd and then Drag'n drop PureBasic_Windows_beta2_X64_6.10 folder.

8.) In the command window "Building PureBasic IDE on Windows"
Enter option 1 (Setting environment and Build the IDE) and press Enter

At the end of the batch, you should see:
PureBasic.exe Successfully Created in D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10
Press any key to continue...

#
Now, to debug, open the new IDE built, in portable mode with the shortcut:
D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10\PureBasic_Portable
And open project D:\PureBasic_Opensource\purebasic-devel\PureBasicIDE\PureBasicIDE.pbp
It's ready for a Compile/Run (F5)

Posted: **Wed Jan 17, 2024 6:50 pm**

Oh, thanks to all of you. I'll try this tomorrow. It's more complex than I thought.

Posted: **Wed Jan 17, 2024 6:56 pm**

Once you've done it, you'll see, it's simple

Posted: **Thu Jan 18, 2024 6:27 am**

Ok, so I've done every step you described. But after opening the PureBasicIDE.pbp it still tells me that "Build\BuildInfo.pb" is missing.

Posted: **Thu Jan 18, 2024 2:46 pm**

Did you build it right, without error message, using MakeWindows.cmd, BuildEnv.cmd or BuildMenu.cmd (Option 1 or 4), before opening the new created purebasic.exe and opening the \purebasic-devel\PureBasicIDE\PureBasicIDE.pbp project with the build already done?

Normally, once built, you should have 2 new "Build" sub-folder inside the purebasic open source folder:

Code: Select all

D:\PureBasic_Opensource\purebasic-devel\DialogManager\Build (with DialogCompiler.exe, dummy)
D:\PureBasic_Opensource\purebasic-devel\PureBasicIDE\Build (with About.pb,..., BuildInfo.pb,..., VersionInfo.rc)

Build\BuildInfo.pb is Autogenerated by makebuildinfo.pb.

Here's what I get in the command window:

Code: Select all

======================================================================================
Building PureBasic IDE on Windows

Target PureBasic directory: D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10

  Building  on Windows (official method):
    1 - Setting environment and Build the IDE
    2 - Setting environment and Build the IDE debug version
    3 - Setting environment for PureBasic

  Building on Windows (quick and easy method, without make Unix tool):
    4 - Compil PureBasic
    5 - Compil PBdebugger

    9 - Exit
======================================================================================

> Enter your option and press "Enter": 1

--------------------------------------------------------------------------------------
Setting environment for PureBasic X64 in D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10
--------------------------------------------------------------------------------------

mkdir "Build"
touch Build/dummy
D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/compilers/pbcompiler /QUIET tools/makeversion.pb /EXE Build/makeversion.exe /CONSOLE
Build/makeversion.exe ide Build/VersionInfo.rc D:\PureBasic_Opensource\purebasic-devel\PureBasicIDE/data/PBSourceFile.ico
make --directory ../DialogManager
make[1]: Entering directory `D:/PureBasic_Opensource/purebasic-devel/DialogManager'
mkdir "Build"
touch Build/dummy
"D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/Compilers/PBCompiler" /QUIET DialogCompiler.pb /EXE Build/DialogCompiler.exe
make[1]: Leaving directory `D:/PureBasic_Opensource/purebasic-devel/DialogManager'
../DialogManager/Build/DialogCompiler.exe dialogs/Find.xml Build/Find.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Grep.xml Build/Grep.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Goto.xml Build/Goto.pb
../DialogManager/Build/DialogCompiler.exe dialogs/CompilerOptions.xml Build/CompilerOptions.pb
../DialogManager/Build/DialogCompiler.exe dialogs/AddTools.xml Build/AddTools.pb
../DialogManager/Build/DialogCompiler.exe dialogs/About.xml Build/About.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Preferences.xml Build/Preferences.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Templates.xml Build/Templates.pb
../DialogManager/Build/DialogCompiler.exe dialogs/StructureViewer.xml Build/StructureViewer.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Projects.xml Build/Projects.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Build.xml Build/Build.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Diff.xml Build/Diff.pb
../DialogManager/Build/DialogCompiler.exe dialogs/FileMonitor.xml Build/FileMonitor.pb
../DialogManager/Build/DialogCompiler.exe dialogs/History.xml Build/History.pb
../DialogManager/Build/DialogCompiler.exe dialogs/HistoryShutdown.xml Build/HistoryShutdown.pb
../DialogManager/Build/DialogCompiler.exe dialogs/CreateApp.xml Build/CreateApp.pb
../DialogManager/Build/DialogCompiler.exe dialogs/Updates.xml Build/Updates.pb
rm -f Build/DefaultTheme.zip
zip -jq Build/DefaultTheme.zip data/DefaultTheme/*
mkdir "D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/Themes"
rm -f "D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/Themes/SilkTheme.zip"
zip -jq "D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/Themes/SilkTheme.zip" data/SilkTheme/*
D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/compilers/pbcompiler /QUIET tools/makebuildinfo.pb /EXE Build/makebuildinfo.exe /LINENUMBERING /CONSOLE
Build/makebuildinfo.exe Build
D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/compilers/pbcompiler /QUIET PureBasic.pb /EXE D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10/PureBasic.exe /THREAD /UNICODE /XP /USER /ICON data/PBLogoBig.ico /DPIAWARE /OPTIMIZER /RESOURCE Build/VersionInfo.rc

--------------------------------------------------------------------------------------
PureBasic.exe Successfully Created in D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10
--------------------------------------------------------------------------------------
Appuyez sur une touche pour continuer...

Posted: **Thu Jan 18, 2024 3:04 pm**

To simplify the Building on Windows, it's probably easier to just use the quick & easy method:
MakeWindows.cmd <YourPureBasicPath>
(D:\PureBasic_Opensource\purebasic-devel\PureBasicIDE\MakeWindows.cmd D:\PureBasic_Opensource\PureBasic_Windows_beta2_X64_6.10)
or via my BuildMenu and option 4 - Compil PureBasic

PureBasic Forums - English

Can't compile the IDE

Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE

Re: Can't compile the IDE