PureBasic Forums - English

Posted: **Sat Jan 17, 2009 8:38 pm**

Hi,

just because i needed to know the number of lines for each of my sources programs, i made this little code, i also added the number of procedures inside each program

The program counts only line of code and extracts empty and remarks' lines

Code: Select all

./pblc *.pb
or
./pblc adir_*.pb
or
./pblc adir_*.pb adir_*.pbi
or
./pblc adir_*.pb?

Code: Select all

; *****************************
; ***                       ***
; ***   pblc - count line   ***
; ***                       ***
; *****************************
;
; count effectives lines of PureBasic programs without remarks and empty lines
; and count number of procedures

Global argc.i, thefile.s, totline.i, totproc.i

Procedure.i Get_NBLINE(thefile.s)
Protected NewList line_prg.s(), tmp.s
Protected ligne.i = 0, proc.i = 0, i.i = 1
Protected rem.i = #False : car.i = #False

  ClearList(Line_prg())
  
  If ReadFile(0, thefile)
    While Eof(0) = 0
      tmp = ReadString(0)
      AddElement(Line_prg())
        line_prg() = tmp
    Wend
    CloseFile(0)
  Else
    PrintN("Unable to read " + thefile)
    End
  EndIf
  
  ResetList(line_prg())
  ForEach line_prg()
    l = Len(line_prg())
    rem = #False : car = #False : i = 1
    While i <= l
      a$ = Mid(line_prg(),i,1)
      If a$ = Chr(32) : i + 1 : EndIf
      If a$ = ";" And car = #False : i + 1 : rem = #True : EndIf
      If a$ > Chr(32) And a$ < Chr(128) : car = #True : EndIf
      i + 1
    Wend
    If car = #True And rem = #False : ligne + 1 : EndIf
    If FindString(line_prg(),"EndProcedure",1) And rem = #False : proc + 1 : EndIf
  Next
  
  PrintN(RSet(Str(ligne),6," ") + " " + thefile + "("+Str(proc)+")")
  totproc + proc
  ProcedureReturn ligne
EndProcedure

OpenConsole()
  argc = CountProgramParameters()
  totproc = 0
  
  If argc = 0
    PrintN("Usage : pblc <filename>")
    End
  EndIf
  
  If argc > 1                                    ; several files (because we're using joker/wildcard "*" or "?")
    For i = 0 To argc - 1
      thefile = ProgramParameter(i)
      totline + Get_NBLINE(thefile)
    Next i
    PrintN("------------")
    PrintN(RSet(Str(totline),6," ") + " total("+Str(totproc)+")")
  Else
    Get_NBLINE(ProgramParameter())
  EndIf
  
CloseConsole()

Totally inspired by the "wc : word count" of Linux shell
Thanks to Captn. Jinguji & GBeebe for the ProgramParameter joker/wildcard.
not tested under win

Posted: **Sun Jan 18, 2009 5:19 pm**

Thanks for sharing your code

But like usually, only one in this forum, have not understand how can i do for use it

If you have a little bit of time for explain in just several line

Posted: **Sun Jan 18, 2009 5:59 pm**

Hi KCC

first of all, open a console (cmd.exe under windows or Xterm under GNU/Linux or MacOSX?)

under the prompt
Windows :

C:\>pblc *.pb

Un*x

$./pblc *.pb

result => gives you the total number of lines except empty & remarks lines and the number of procedure for each files.

new version : check "IncludeFile" and automatically add the file included

Code: Select all

; *****************************
; ***                       ***
; ***   pblc - count line   ***
; ***                       ***
; *****************************
;
; count effectives lines of PureBasic programs without remarks and empty lines
; and count number of procedures
; added : get include files

Global argc.i, thefile.s, totline.i, totproc.i
Global NewList prg.s()

Procedure.i Get_NBLINE(thefile.s)
Protected NewList line_prg.s(), tmp.s
Protected ligne.i = 0, proc.i = 0, i.i = 1
Protected rem.i = #False : car.i = #False

  ClearList(Line_prg())
  
  If ReadFile(0, thefile)
    While Eof(0) = 0
      tmp = ReadString(0)
      AddElement(Line_prg())
        line_prg() = tmp
    Wend
    CloseFile(0)
  Else
    PrintN("Unable to read " + thefile)
    End
  EndIf
  
  ResetList(line_prg())
  ForEach line_prg()
    l = Len(line_prg())
    rem = #False : car = #False : i = 1
    While i <= l
      a$ = Mid(line_prg(),i,1)
      If a$ = Chr(32) : i + 1 : EndIf
      If a$ = ";" And car = #False : i + 1 : rem = #True : EndIf
      If a$ > Chr(32) And a$ < Chr(128) : car = #True : EndIf
      i + 1
    Wend
    If car = #True And rem = #False : ligne + 1 : EndIf
    If FindString(line_prg(),"EndProcedure",1) And rem = #False : proc + 1 : EndIf
  Next
  
  PrintN(RSet(Str(ligne),6," ") + " " + thefile + "("+Str(proc)+")")
  totproc + proc
  ProcedureReturn ligne
EndProcedure

Procedure MakeUnique()
Protected Dim prg_tmp.s(1)
Protected i.i = 0, l.i = 0
Protected tmp.s

  l = ListSize(prg())
  ReDim prg_tmp(l)
  SortList(prg(),#PB_Sort_Ascending)

  ResetList(prg())
  ForEach prg()
    prg_tmp(i) = prg()
    i+1
  Next

  ClearList(prg())

  i = 0
  tmp = prg_tmp(i)
  While i < l
    If prg_tmp(i+1) <> tmp
      AddElement(prg())
        prg() = tmp
    EndIf
    i+1
    tmp = prg_tmp(i)
  Wend
EndProcedure

Procedure CheckInclude()
Protected pos.i, pos2.i, pos3.i
Protected ltmp.s, ltmp2.s

  ResetList(prg())
  ForEach prg()
    If ReadFile(0, prg())
      While Eof(0) = 0
        ltmp = ReadString(0)
        pos = FindString(ltmp,"IncludeFile",1)
        If pos
          pos2 = FindString(ltmp,Chr(34),pos+1)
          If pos2 > pos
            pos3 = FindString(ltmp,Chr(34),pos2+1)
            If pos3 > pos2
              ltmp2 = Mid(ltmp,pos2+1,(pos3)-(pos2+1))
              AddElement(prg())
                prg() = ltmp2
            EndIf
          EndIf
        EndIf
      Wend
      CloseFile(0)
    Else
      PrintN("Unable to read " + prg())
      End
    EndIf
  Next
EndProcedure

OpenConsole()
  argc = CountProgramParameters()
  totproc = 0
  
  If argc = 0
    PrintN("Usage : pblc <filename>")
    End
  EndIf
  
  For i = 0 To argc - 1
    AddElement(prg())
      prg() = ProgramParameter(i)
  Next i

  CheckInclude()
  MakeUnique()

  ResetList(prg())
  If ListSize(prg()) > 1                                    ; several files (because we're using joker/wildcard "*" or "?")
    ForEach prg()
      totline + Get_NBLINE(prg())
    Next
    PrintN("------------")
    PrintN(RSet(Str(totline),6," ") + " total("+Str(totproc)+")")
  Else
    FirstElement(prg())
    Get_NBLINE(prg())
  EndIf

CloseConsole()

Posted: **Mon Jan 19, 2009 11:38 am**

I don't understant why it's not works.

I have open the Console mode by "cmd"
I have compile your code in "PLBC.exe"
I have write "C:\PLBC *.pb" and even "c:\PLBC Essai.pb" but nothing better

Another black windows open one second aand disappears

Decidely 2009 it's not a good year for KCC

Posted: **Mon Jan 19, 2009 1:38 pm**

Kwaï chang caïne wrote:I don't understant why it's not works.

I have open the Console mode by "cmd"
I have compile your code in "PLBC.exe"
I have write "C:\PLBC *.pb" and even "c:\PLBC Essai.pb" but nothing better

Another black windows open one second aand disappears

Decidely 2009 it's not a good year for KCC

you're right i forgot to tell, it's GNU/Linux only, here is a new version, for both Win & Linux

Code: Select all

; *****************************
; ***                       ***
; ***   pblc - count line   ***
; ***                       ***
; *****************************
;
; count effectives lines of PureBasic programs without remarks and empty lines
; and count number of procedures
; added : get include files

Global argc.i, thefile.s, totline.i, totproc.i
Global NewList prg.s()

Procedure.i Get_NBLINE(thefile.s)
Protected NewList line_prg.s(), tmp.s
Protected ligne.i = 0, proc.i = 0, i.i = 1
Protected rem.i = #False : car.i = #False

  ClearList(Line_prg())
  
  If ReadFile(0, thefile)
    While Eof(0) = 0
      tmp = ReadString(0)
      AddElement(Line_prg())
        line_prg() = tmp
    Wend
    CloseFile(0)
  Else
    PrintN("Unable to read " + thefile)
    End
  EndIf
  
  ResetList(line_prg())
  ForEach line_prg()
    l = Len(line_prg())
    rem = #False : car = #False : i = 1
    While i <= l
      a$ = Mid(line_prg(),i,1)
      If a$ = Chr(32) : i + 1 : EndIf
      If a$ = ";" And car = #False : i + 1 : rem = #True : EndIf
      If a$ > Chr(32) And a$ < Chr(128) : car = #True : EndIf
      i + 1
    Wend
    If car = #True And rem = #False : ligne + 1 : EndIf
    If FindString(line_prg(),"EndProcedure",1) And rem = #False : proc + 1 : EndIf
  Next
  
  PrintN(RSet(Str(ligne),6," ") + " " + thefile + "("+Str(proc)+")")
  totproc + proc
  ProcedureReturn ligne
EndProcedure

Procedure MakeUnique()
Protected Dim prg_tmp.s(1)
Protected i.i = 0, l.i = 0
Protected tmp.s

  l = ListSize(prg())
  ReDim prg_tmp(l)
  SortList(prg(),#PB_Sort_Ascending)

  ResetList(prg())
  ForEach prg()
    prg_tmp(i) = prg()
    i+1
  Next

  ClearList(prg())

  i = 0
  tmp = prg_tmp(i)
  While i < l
    If prg_tmp(i+1) <> tmp
      AddElement(prg())
        prg() = tmp
    EndIf
    i+1
    tmp = prg_tmp(i)
  Wend
EndProcedure

Procedure CheckInclude()
Protected pos.i, pos2.i, pos3.i
Protected ltmp.s, ltmp2.s

  ResetList(prg())
  ForEach prg()
    If ReadFile(0, prg())
      While Eof(0) = 0
        ltmp = ReadString(0)
        pos = FindString(ltmp,"IncludeFile",1)
        If pos
          pos2 = FindString(ltmp,Chr(34),pos+1)
          If pos2 > pos
            pos3 = FindString(ltmp,Chr(34),pos2+1)
            If pos3 > pos2
              ltmp2 = Mid(ltmp,pos2+1,(pos3)-(pos2+1))
              AddElement(prg())
                prg() = ltmp2
            EndIf
          EndIf
        EndIf
      Wend
      CloseFile(0)
    Else
      PrintN("Unable to read " + prg())
      End
    EndIf
  Next
EndProcedure

OpenConsole()
  argc = CountProgramParameters()
  totproc = 0
  
  If argc = 0
    PrintN("Usage : pblc <filename>")
    End
  EndIf
  
  CompilerSelect #PB_Compiler_OS
    CompilerCase #PB_OS_Windows
; from GBeebe
      file.s = ProgramParameter()
      dir = ExamineDirectory(#PB_Any, GetPathPart(file.s), GetFilePart(file.s))
      While NextDirectoryEntry(dir)
        AddElement(prg())
          prg() = DirectoryEntryName(dir)
      Wend
      FinishDirectory(dir) 
    CompilerCase #PB_OS_Linux
      For i = 0 To argc - 1
        AddElement(prg())
          prg() = ProgramParameter(i)
      Next i

  CompilerEndSelect

  CheckInclude()
  MakeUnique()

  ResetList(prg())
  If ListSize(prg()) > 1                                    ; several files (because we're using joker/wildcard "*" or "?")
    ForEach prg()
      totline + Get_NBLINE(prg())
    Next
    PrintN("------------")
    PrintN(RSet(Str(totline),6," ") + " total("+Str(totproc)+")")
  Else
    FirstElement(prg())
    Get_NBLINE(prg())
  EndIf

CloseConsole()

Posted: **Tue Jan 20, 2009 7:11 am**

Very nice

was in my todo list #1977893...er probably when I am 387 years old!

Posted: **Tue Jan 20, 2009 7:16 am**

BUT

it does not count nested includefiles....

Posted: **Tue Jan 20, 2009 10:05 am**

you're right i forgot to tell, it's GNU/Linux only, here is a new version, for both Win & Linux

Thanks FLAITH
Aparently my PC is idle

He don't want count, i have the same result with your new code

Perhaps because i'm on W2000 :roll:
Or surely because, i'm a mule

Posted: **Tue Jan 20, 2009 7:09 pm**

kinglestat wrote:BUT

it does not count nested includefiles....

Thanks, i'm adding it in my todos list

Kwaï chang caïne wrote:
you're right i forgot to tell, it's GNU/Linux only, here is a new version, for both Win & Linux
Thanks FLAITH
Aparently my PC is idle
He don't want count, i have the same result with your new code
Perhaps because i'm on W2000 :roll:

sorry about that, could you tell me what you have done before running the code ? (did you opened a console via cmd.exe ? at the prompt, did you entered C:\>pblc *.pb ?)
Thanks for giving me those results

Kwaï chang caïne wrote:Or surely because, i'm a mule

of course you're not

Posted: **Wed Jan 21, 2009 9:30 am**

Code: Select all

of course you're not

Thanks FLAITH, but sometimes, i have somes doubt

Everybody say to the creator of a code : "Yees great !!!! thanks for sharing ......." or "Great job XXXX"
And poor KCC is alone in the middle of his desktop with his "TV with keyboard and mouse" and he can't be happy because, when he clic.....then his "TV with keyboard and mouse" say "Biiiiinnnng !!!"

And his TV show a splendid board with a red cross

Well i have do all you have say to me.

1/ Copy your code
2/ Paste in IDE v4.30
3/ compile in "c:\pblc.exe"
4/ Open console of W2000 (Cmd)
5/ write c:\pblc *.pb and return
6/ It appear another windows console, and she close immediatly.
I can't have the time to read her

If i try another time, it's the same result , appear and close in one second.
Like if in PB there are not the loop of event :roll:

Excuse me to be a ball and chain

If you don't find how, it's not very important, because apparently just KCC have this problem.
KCC also, have want to see the result of your program
But don't loose your precious time for KCC

Posted: **Wed Jan 21, 2009 1:50 pm**

KCC : compile the source as CONSOLE executable (not as WINDOWS executable).

Posted: **Wed Jan 21, 2009 2:35 pm**

gnozal wrote:KCC : compile the source as CONSOLE executable (not as WINDOWS executable).

......

....

..

Posted: **Thu Jan 22, 2009 12:17 pm**

gnozal wrote:KCC : compile the source as CONSOLE executable (not as WINDOWS executable).

Flaith have right........i'm not a mule

................i have a brain oyster

KCC is the future candidate for a brain transplant

Who know better KCC, that the big GNOZAL. :roll:
All is possible with KCC

I say to all, only KCC can find a bug where there not are

KCC is the terror of the hotline

KCC is the first who find a bug in a empty page of IDE

Is impossible to count, all the error that KCC can find, with a code who works fine

Thanks again GNOZAL you have win a new game with KCC

flaith wrote:
gnozal wrote:KCC : compile the source as CONSOLE executable (not as WINDOWS executable).
...... .... ..

Excuse me FLAITH, you must learn much years again in psychology for have a chance to save KCC

With your successive SMILEY "

......

....

..

", you make me laughting like a whale.

Now i'm the "MobyDick" of the forum

Thank you very much for your patience and your kindness.
And also thanks for your good job and for sharing

I wish you a very good day

Moby dick

Posted: **Thu Jan 22, 2009 7:36 pm**

Thanks a lot KCC

Posted: **Mon May 06, 2013 4:22 pm**

Hello - I wanted to Check my project's code and so found this thread - But found the old code quite clumpsy.

New Features:

Comments
supports "includePath"- command
Also "scan only file and its includes" - mode
Finds ALL Folders & Subfolders
Calcs Project COST.

Code: Select all

; *****************************
; ***                       ***
; ***   pblc - count line   ***
; ***                       ***
; *****************************
;
; count effectives lines of PureBasic programs without remarks and empty lines
; and count number of procedures
; added : get include files
; *****************************
; original from "flaith" - http://www.purebasic.fr/english/viewtopic.php?p=274560
; edited from Max Wolfgang Aigner - http://www.gemusoft.com 
; DAte: 06.05.2013
; added - get all include files, find "includePath", use as openconsole()-software (windows)
; *****************************
; - Version 1.0.0
; *****************************

#Count_ProjectWise_InsteadOf_Folderwise = 0 ; change this to = 1 if you want to scan only the includes of a project and not the whole folder and subfolders.
Global argc.i, thefile.s
Global totline.i ; total amount of counting lines (only real code lines)
Global totproc.i 
Global Zei_All_Lines_Count_File ; counts every single line -> to compare, how much lines you have wasted.
Global Zei_All_Lines_Count_ALL  ; all lines alltogether
Global NewList prg.s()

Procedure.i Get_NBLINE(thefile.s) ; count all real-code-files in the prg.s() list
Protected NewList line_prg.s(), tmp.s
Protected ligne.i = 0, proc.i = 0, i.i = 1
Protected rem.i = #False : car.i = #False

Zei_All_Lines_Count_File =0
  ClearList(line_prg())
  
  ; load the whole file into the list line_prg()
  If ReadFile(0, thefile) 
    While Eof(0) = 0
      tmp = ReadString(0)
      AddElement(line_prg())
        line_prg() = tmp
    Wend
    CloseFile(0)
  Else
    PrintN("Unable to read " + thefile)
    Input()
    End
  EndIf
  
  ResetList(line_prg())
  ForEach line_prg()
    l       = Len(line_prg())
    rem     = #False                      : car = #False : i = 1
    While i <= l ; parse every single character i to L
      a$    = Mid(line_prg(),i,1)
      If a$ = Chr(32)                     : i + 1        : EndIf  ; char is empty -> spacebar-char. -> skip it
      If a$ = ";" And car = #False        : i + 1        : rem = #True : EndIf ; first char is a semicolon -> comment
      If a$ > Chr(32) And a$ < Chr(128)   : car = #True  : EndIf  ; first sign is a letter -> Command -> counts!
      i + 1
    Wend
    If car = #True And rem = #False       : ligne + 1    : EndIf
    Zei_All_Lines_Count_File + 1 ; counts every single line -> no if needed.
    If FindString(line_prg(),"EndProcedure",1) And rem = #False : proc + 1 : EndIf
  Next
  
  PrintN                  ( RSet(Str(ligne),6," ") + " " + thefile + "("+Str(proc)+")")
  totproc                 + proc
  Zei_All_Lines_Count_ALL + Zei_All_Lines_Count_File
  ProcedureReturn ligne
EndProcedure
Procedure MakeUnique()
Protected Dim prg_tmp.s(1)
Protected i.i = 0, l.i = 0
Protected tmp.s

  l = ListSize(prg())
  ReDim prg_tmp(l)
  SortList(prg(),#PB_Sort_Ascending)

  ResetList(prg())
  ForEach prg()
    prg_tmp(i) = prg()
    i+1
  Next

  ClearList(prg())

  i = 0
  tmp = prg_tmp(i)
  While i < l
    If prg_tmp(i+1) <> tmp
      AddElement(prg())
        prg() = tmp
    EndIf
    i+1
    tmp = prg_tmp(i)
  Wend
EndProcedure
Procedure CheckInclude() ; Searches through every file in prg() list -> extracts "include" and "includepath" -> adds files to prg() list.
Protected pos.i, pos2.i, pos3.i
Protected ltmp.s, ltmp2.s
Static pfad_IncludePath.s

  ResetList(prg())
  
  ForEach prg()
    PrintN ( "process: " + prg())
    If ReadFile(0, prg())
      While Eof(0) = 0
        ltmp   = ReadString(0)
        pos    = FindString(ltmp,"IncludeFile",1)
        If pos
          pos2 = FindString(ltmp,Chr(34),pos+1)
          If pos2 > pos
            pos3 = FindString(ltmp,Chr(34),pos2+1)
            If pos3 > pos2
              ltmp2 = Mid(ltmp,pos2+1,(pos3)-(pos2+1))
              AddElement(prg())
                prg() = pfad_IncludePath + "\" + ltmp2 
                PrintN ( "found include: " + prg())
                PreviousElement ( prg())
            EndIf
          EndIf
        Else 
        ; 
           pos_semikolon = FindString ( ltmp , ";" ,1)
           pos = FindString(ltmp,"IncludePath",1)
            If (pos < pos_semikolon  And pos > 0) Or (pos_semikolon = 0 And pos > 0); wenns nicht auskommentiert wurde
               pos2 = FindString(ltmp,Chr(34),pos+1)
                  If pos2 > pos
                     pos3 = FindString(ltmp,Chr(34),pos2+1)
                     If pos3 > pos2
                        pfad_IncludePath = Mid(ltmp,pos2+1,(pos3)-(pos2+1))
                        Debug "includepath found: " + pfad_IncludePath
                     EndIf 
                  EndIf
            EndIf 
        EndIf 
      Wend
      CloseFile(0)
    Else
      PrintN("Unable to read " + prg())
      Continue 
    EndIf
  Next
EndProcedure
Procedure CheckFolder             ( path.s) ; Checks every source-file in a folder and every subfolder
      PrintN                      ( "CheckFolder: " + path)
      dir = ExamineDirectory      ( #PB_Any, path, "*.*") ; change pattern at line 151 -> where "if ext =".. stands. this has to be *.*, to find the folders
      If IsDirectory              ( dir ) > 0
        While NextDirectoryEntry  ( dir )
           If DirectoryEntryType  ( dir ) = #PB_DirectoryEntry_Directory
              If Not              ( DirectoryEntryName (dir) = "." Or DirectoryEntryName (dir) = ".." ) ; filter out the standard-directorys that we dont want to use..
                 checkfolder      ( path  + DirectoryEntryName (dir) + "\")
              Else
                 Debug path  + DirectoryEntryName (dir) + "\"
              EndIf  
           ElseIf DirectoryEntryType ( dir ) = #PB_DirectoryEntry_File
              ext.s = GetExtensionPart ( DirectoryEntryName ( dir ))
              If ext  = "pb" Or ext = "pbi"
                AddElement          ( prg())
                  prg               ( ) = path +DirectoryEntryName(dir)
                  PrintN            ( "File Found : " + DirectoryEntryName(dir))
              EndIf 
           Else
              
           EndIf  
        Wend
        FinishDirectory           ( dir ) 
      Else
         PrintN ( "ERROR - Can't initialize the directory. maybe you don't have enough rights")
      EndIf 
EndProcedure 

Debug "hallo"
OpenConsole ()

CompilerIf #Count_ProjectWise_InsteadOf_Folderwise = 1 ; check only the Project-main-file by entering its name and its includes.
   totproc = 0
; from GBeebe
      file.s = Input()
   
      SetCurrentDirectory  ( GetPathPart ( file ))
      SetClipboardText     ( file )
      dir = ExamineDirectory(#PB_Any, GetPathPart(file.s), GetFilePart(file.s))
      While NextDirectoryEntry(dir)
        AddElement(prg())
          prg() = DirectoryEntryName(dir)
          Debug "dir found: " + DirectoryEntryName(dir)
      Wend
      FinishDirectory(dir) 
      CheckInclude()
CompilerElse ; check the whole folder
    PrintN      ( "-----------------------------------------------------")
    PrintN      ( " Welcome in LoC-Counter-PB. Initiated by 'Flaith' ,")
    PrintN      ( " Edited And Enhanced by 'MaxOhnesorg - Max Wolfgang Aigner'.")
    PrintN      ( " Counts the Lines of Code (LoC) of your project. " + Chr(10) + "Copy this file to your Projectfolder and run it.")
    PrintN      ( "-----------------------------------------------------")
    PrintN      ( "")
    CheckFolder ( GetPathPart (ProgramFilename ()))
CompilerEndIf 

  MakeUnique()

  ResetList(prg())
  If ListSize(prg()) > 1     ; several files (because we're using joker/wildcard "*" or "?")
    ForEach prg()
      totline + Get_NBLINE(prg())
    Next
    PrintN("------------")
    PrintN(RSet(Str(totline),6," ") + " total("+Str(totproc)+")")
  Else
    If FirstElement(prg()) ; if there is any element.
       lastcount = Get_NBLINE(prg())
    EndIf 
  EndIf
  
    PrintN(RSet(Str(Zei_All_Lines_Count_ALL),6) + " <- All Lines, even the blank ones in Code ")
    If totline > 0
      PrintN(RSet(Str(totline/Zei_All_Lines_Count_ALL * 100),6) + " % RealLines/AllLines  Ratio")
      PrintN(RSet(Str(totline * 5 ),6) + " EUR Production Cost (Standard Salery - 50 EUR  per 10 LoC)") ; works better, the bigger your program is -> because of the planning and debugging - phasis, which a small program doesn't have that much.
    Else
       PrintN(RSet(Str(lastcount * 5 ),6) + " EUR Production Cost (Standard Salery - 50 EUR  per 10 LoC)")
    EndIf 
    
PrintN ( Chr(10) + "Goodbye - Auf Wiedersehen" )
Input()

[Edit] Also supports Cost-Calculation now[/Edit]

-> Code can scan your whole Project Directory

PureBasic Forums - English

PBLC - Line Count

PBLC - Line Count

Re: PBLC - Line Count