Bakker: 1 to 1 backup copier
Posted: Wed Feb 22, 2006 11:51 pm
A friend in an office wanted a simple backup copier that generated 1 to 1 copies in directories either dated by ddmmyyyy or ddmmyyyy-hhmm, any time you pressed a button.
The admin module generates the backup (and can perform it itself), save config and file lists to the same file. Can automatically reload the backup file when you restart the program. Whinges if the parameters are not set and you try to save or run etc.
The client is s simple big button that can run the backup each time you hit it. It also reloads the admin created backup list if found, whinges and exits if not. The button shows the number of files being processed while running. The small window background changes to red if there was a file error at all (will make a log soon).
Do what you like with it. Get your own icons!! If i've missed someone's copyright on a procedure, put it in and repost.
admin module
client module
The admin module generates the backup (and can perform it itself), save config and file lists to the same file. Can automatically reload the backup file when you restart the program. Whinges if the parameters are not set and you try to save or run etc.
The client is s simple big button that can run the backup each time you hit it. It also reloads the admin created backup list if found, whinges and exits if not. The button shows the number of files being processed while running. The small window background changes to red if there was a file error at all (will make a log soon).
Do what you like with it. Get your own icons!! If i've missed someone's copyright on a procedure, put it in and repost.
admin module
Code: Select all
;============================================================================================================================
;
;============================================================================================================================
Declare SearchEngine(SearchDir.s) ; Recursive file path searcher
Declare MyBalloonTips(btWindow.l, btGadget.l, btText.s) ; Custom balloon tooltips.
Declare.s AddDateSuffix(Date.s) ; Add the abbreviated date suffix
Declare GetDayOfWeek(Gadget.l) ; Get the day of the week in name form
Declare SetDate(Windowid.l) ; Set the current date in the title bar
Declare SetStat(Field.l, Message.s) ; Shortcut to setting text on the status bar
Declare.s GetDriveLabel(drivename.s) ; Get the drive label for a drive name
;============================================================================================================================
;
;============================================================================================================================
Enumeration 1
#Window_bakker
EndEnumeration
#WindowIndex = #PB_Compiler_EnumerationValue
Enumeration 1
#Gadget_bakker_dirtree
#Gadget_bakker_filetree
#Gadget_bakker_filebackup
#Gadget_bakker_bsave
#Gadget_bakker_brun
#Gadget_bakker_blocation
#Gadget_bakker_fmain
#Gadget_bakker_cbdateyear
#Gadget_bakker_cbdayhour
#Gadget_bakker_cblocation
#Gadget_bakker_flocation
#Gadget_bakker_llocation
#Gadget_bakker_location
#Gadget_bakker_lvolume
EndEnumeration
#GadgetIndex = #PB_Compiler_EnumerationValue
Enumeration 1
#StatusBar_bakker
#StatusBar_bakker_messages = 0
#StatusBar_bakker_records = 1
EndEnumeration
#StatusBarIndex = #PB_Compiler_EnumerationValue
Enumeration 1
#Image_bakker_bsave
#Image_bakker_brun
#Image_bakker_blocation
EndEnumeration
#ImageIndex = #PB_Compiler_EnumerationValue
;============================================================================================================================
;
;============================================================================================================================
CatchImage(#Image_bakker_bsave, ?_OPT_bakker_bsave)
CatchImage(#Image_bakker_brun, ?_OPT_bakker_brun)
CatchImage(#Image_bakker_blocation, ?_OPT_bakker_blocation)
;============================================================================================================================
;
;============================================================================================================================
DataSection
_OPT_bakker_bsave: IncludeBinary "\Development\Resources\Forms\Images\savelist48x48.ico"
_OPT_bakker_brun: IncludeBinary "\Development\Resources\Forms\Images\run48x48.ico"
_OPT_bakker_blocation: IncludeBinary "\Development\Resources\Forms\Images\file48x48.ico"
EndDataSection
;============================================================================================================================
;
;============================================================================================================================
Procedure.l Window_bakker()
If OpenWindow(#Window_bakker,56,67,800,600,#PB_Window_SystemMenu|#PB_Window_MinimizeGadget|#PB_Window_ScreenCentered|#PB_Window_Invisible,"FileBakker")
If CreateGadgetList(WindowID(#Window_bakker))
ExplorerTreeGadget(#Gadget_bakker_dirtree,0,0,200,260,"",#PB_Explorer_NoFiles|#PB_Explorer_NoDriveRequester|#PB_Explorer_AutoSort)
ExplorerListGadget(#Gadget_bakker_filetree,205,0,595,260,"",#PB_Explorer_MultiSelect|#PB_Explorer_GridLines|#PB_Explorer_FullRowSelect|#PB_Explorer_NoFolders|#PB_Explorer_NoParentFolder|#PB_Explorer_NoDirectoryChange|#PB_Explorer_NoDriveRequester|#PB_Explorer_AutoSort)
ListIconGadget(#Gadget_bakker_filebackup,0,265,800,255,"Filename",690,#PB_ListIcon_GridLines|#PB_ListIcon_FullRowSelect|#PB_ListIcon_AlwaysShowSelection|#PB_ListIcon_MultiSelect)
AddGadgetColumn(#Gadget_bakker_filebackup,1,"Status",80)
ButtonImageGadget(#Gadget_bakker_bsave,0,525,55,55,ImageID(#Image_bakker_bsave))
ButtonImageGadget(#Gadget_bakker_brun,55,525,55,55,ImageID(#Image_bakker_brun))
ButtonImageGadget(#Gadget_bakker_blocation,110,525,55,55,ImageID(#Image_bakker_blocation))
Frame3DGadget(#Gadget_bakker_fmain,170,518,630,30,"")
OptionGadget(#Gadget_bakker_cbdateyear,175,530,130,15,"Backup as ddmmyyyy")
OptionGadget(#Gadget_bakker_cbdayhour,305,530,160,15,"Backup as ddmmyyyy-hhmm")
CheckBoxGadget(#Gadget_bakker_cblocation,465,530,170,15,"Backup only to named volume")
Frame3DGadget(#Gadget_bakker_flocation,170,543,630,35,"")
TextGadget(#Gadget_bakker_llocation,175,560,85,15,"Backup location")
StringGadget(#Gadget_bakker_location,260,555,535,20,"",#PB_String_ReadOnly)
TextGadget(#Gadget_bakker_lvolume,645,530,150,15,"")
CreateStatusBar(#StatusBar_bakker,WindowID(#Window_bakker))
AddStatusBarField(670)
AddStatusBarField(130)
HideWindow(#Window_bakker,0)
ProcedureReturn WindowID(#Window_bakker)
EndIf
EndIf
EndProcedure
;============================================================================================================================
; My personal constants
;============================================================================================================================
#Version = "v0.00" ; Program version
#CopyRight = "<°)))o><²³ Baker Admin(c) 2006, PeriTek Visions " + #Version ; Copyright string
#Eol = Chr(10) + Chr(13) ; End of line marker
;============================================================================================================================
; Custom date routine structure
;============================================================================================================================
Structure DateStructure ; Custom date routine
Year.w
Month.w
DayOfWeek.w
Day.w
Hour.w
Minute.w
Second.w
Milliseconds.w
EndStructure
;============================================================================================================================
; Window data structure
;============================================================================================================================
Structure windowdata ; Window structure data
winhandle.l ; Main window handle
statushandle.l ; Statusbar handle
mutex.l ; Prevent multiple windows from opening
EndStructure
;==============================================================================================================================
; Program data structure
;==============================================================================================================================
Structure programdata ; Program data structure
curdir.s ; Current program startup directory
progquit.l ; User quit the program, so set the quit value to allow program to end repeat loop
inifile.s ; Name and path of the options file
curline.l ; Always the current line in the list object
daynum.l ; Numerical day of the week mapped to word format
weekday.s ; Named day of the week
;---------------------------------------------------------
backupto.s
volume.s
dateformat.s
volforce.s
;---------------------------------------------------------
fileid.l
filecounter.l
curfile.s
dirdate.s
newpath.s
oldpath.s
EndStructure
;==============================================================================================================================
; All global variables
;==============================================================================================================================
Global program.programdata, form.windowdata
;==============================================================================================================================
; Get current direectory and store it for later
;==============================================================================================================================
program\curdir = Space(512) ; Give the variable enough space
If GetCurrentDirectory_(Len(program\curdir), @program\curdir) <> 0 ; Get the current directory
If Right(program\curdir, 1) <> "\" ; Each O/S does it differently so check for backspace
program\curdir + "\"
EndIf
EndIf
;==============================================================================================================================
; Create local picture and icon directory variables
;==============================================================================================================================
;==============================================================================================================================
; Setup day and month literal names
;==============================================================================================================================
Global Dim NameOfDay.s(7) ; Fill an array with the names of the days (Terry Hough I think)
NameOfDay(0) = "Sunday"
NameOfDay(1) = "Monday"
NameOfDay(2) = "Tuesday"
NameOfDay(3) = "Wednesday"
NameOfDay(4) = "Thursday"
NameOfDay(5) = "Friday"
NameOfDay(6) = "Saturday"
Global Dim DaysPerMonth(12) ; Fill an array on how many days per month there are
For X = 0 To 11
DaysPerMonth(X) = 31
Next
DaysPerMonth(1) = 28
DaysPerMonth(3) = 30
DaysPerMonth(5) = 30
DaysPerMonth(8) = 30
DaysPerMonth(10) = 30
Global Dim NameOfMonth.s(12) ; fill an array with the names of the months
NameOfMonth(0) = "January"
NameOfMonth(1) = "February"
NameOfMonth(2) = "March"
NameOfMonth(3) = "April"
NameOfMonth(4) = "May"
NameOfMonth(5) = "June"
NameOfMonth(6) = "July"
NameOfMonth(7) = "August"
NameOfMonth(8) = "September"
NameOfMonth(9) = "October"
NameOfMonth(10) = "November"
NameOfMonth(11) = "December"
Global Dim Years.s(7) ; fill an array with the years
Years(0) = "2002"
Years(1) = "2003"
Years(2) = "2004"
Years(3) = "2005"
Years(4) = "2006"
Years(5) = "2007"
Years(6) = "2008"
;==============================================================================================================================
;
;==============================================================================================================================
Enumeration #GadgetIndex
#Shortcut_bakker_Delete
#Splitter_Bakker_Vertical
#Splitter_Bakker_Horizontal
EndEnumeration
;==============================================================================================================================
;
;==============================================================================================================================
Enumeration #ImageIndex ; Use last image enumeration, continued from purevision created form
#Image_bakker_messages ; This is the mssages in the status bar
#Image_bakker_records ; This is the number of records in the status bar
#Image_bakker_listfiles ; This is the icon used in the main items list
EndEnumeration
;==============================================================================================================================
; Grab the images to memory for use
;==============================================================================================================================
CatchImage(#Image_bakker_messages, ?_PTK_bakker_messages)
CatchImage(#Image_bakker_records, ?_PTK_bakker_records)
CatchImage(#Image_bakker_listfiles, ?_PTK_bakker_listfiles)
;==============================================================================================================================
; All processable data
;==============================================================================================================================
DataSection
_PTK_bakker_messages : IncludeBinary "C:\Development\Resources\Forms\Images\messages16x16.ico"
_PTK_bakker_records : IncludeBinary "C:\Development\Resources\Forms\Images\records16x16.ico"
_PTK_bakker_listfiles : IncludeBinary "C:\Development\Resources\Forms\Images\files16x16.ico"
EndDataSection
;============================================================================================================================
; Universal, recursive search engine used by many functions
;============================================================================================================================
Procedure SearchEngine(SearchDir.s)
NewList FoundDirs.s()
If SearchDir.s <> ""
If Right(SearchDir.s, 1) = "\"
SearchDir.s = Left(SearchDir.s, Len(SearchDir.s) - 1)
EndIf
AddElement(FoundDirs.s())
FoundDirs.s() = SearchDir.s
Index = 0
Repeat
SelectElement(FoundDirs.s(), Index)
If ExamineDirectory(0, FoundDirs.s(), "*.*")
Path.s = FoundDirs.s() + "\"
While NextDirectoryEntry(0)
Filename.s = DirectoryEntryName(0)
Select DirectoryEntryType(0)
Case 1
program\filecounter + 1
DiskFile.s = Path.s + Filename.s ; Add path and file together (file\path, file\file)
While WindowEvent() : Wend ; Clear the window buffer to avoid forms greying out
AddGadgetItem(#Gadget_bakker_filebackup, -1, DiskFile.s + Chr(10) + "", ImageID(#Image_bakker_listfiles))
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, program\filecounter -1, 0) ; Make sure the current line is visible
StatusBarText(#StatusBar_bakker, #StatusBar_bakker_messages, "Processing: " + DiskFile.s)
StatusBarText(#StatusBar_bakker, #StatusBar_bakker_records, "File: " + Str(program\filecounter))
Case 2
Filename.s = DirectoryEntryName(0)
If Filename.s <> ".." And Filename.s <> "."
AddElement(FoundDirs())
FoundDirs() = Path + Filename.s
EndIf
EndSelect
Wend
EndIf
Index + 1
Until Index > CountList(FoundDirs()) -1
EndIf
EndProcedure
;============================================================================================================================
; Personal balloon tooltip window, colourful and not boring at all.
;============================================================================================================================
Procedure MyBalloonTips(btWindow.l, btGadget.l, btText.s)
ToolTipControl = CreateWindowEx_(0, "ToolTips_Class32", "", $D0000000 | $40, 0, 0, 0, 0, WindowID(btWindow), 0, GetModuleHandle_(0), 0)
SendMessage_(ToolTipControl, 1044, 0, 0)
SendMessage_(ToolTipControl, 1043, $F3D97A, 0)
SendMessage_(ToolTipControl, 1048, 0, 180)
Button.TOOLINFO\cbSize = SizeOf(TOOLINFO)
Button\uFlags = $11
Button\hWnd = GadgetID(btGadget)
Button\uId = GadgetID(btGadget)
Button\lpszText = @btText
SendMessage_(ToolTipControl, $0404, 0, Button)
EndProcedure
;============================================================================================================================
; Adds a suffix To the End of a <= 31 numeral 'date'
;============================================================================================================================
Procedure.s AddDateSuffix(Date.s)
If Date = "1" Or Date = "21" Or Date = "31"
Date = Date + "st"
ElseIf Date = "2" Or Date = "22"
Date = Date + "nd"
ElseIf Date = "3" Or Date = "23"
Date = Date + "rd"
Else
Date = Date + "th"
EndIf
ProcedureReturn Date
EndProcedure
;============================================================================================================================
; Get the current date and the day of the week in word form
;============================================================================================================================
Procedure GetDayOfWeek(Gadget.l)
program\daynum = DayOfWeek(ParseDate("%dd/%mm/%yyyy", GetGadgetText(Gadget.l)))
Select program\daynum
Case 0 : program\weekday = "Sunday"
Case 1 : program\weekday = "Monday"
Case 2 : program\weekday = "Tuesday"
Case 3 : program\weekday = "Wednesday"
Case 4 : program\weekday = "Thursday"
Case 5 : program\weekday = "Friday"
Case 6 : program\weekday = "Saturday"
EndSelect
EndProcedure
;============================================================================================================================
; Sort out the date and display it
;============================================================================================================================
Procedure SetDate(Windowid.l)
newDate.dateStructure
GetSystemTime_(@newDate)
WeekDay.b = newDate\DayOfWeek
Day.b = newDate\Day
Month.b = newDate\Month
Year.w = newDate\Year
CurrentDate.s = NameOfDay(WeekDay) + ", " + AddDateSuffix(Str(Day)) + ", " + NameOfMonth(Month - 1) + ", " + Str(Year)
SetWindowTitle(Windowid.l, #CopyRight + " -- Today is " + CurrentDate.s)
EndProcedure
;============================================================================================================================
; Custom statusbar routine
;============================================================================================================================
Procedure SetStat(Field.l, Message.s)
StatusBarText(#StatusBar_bakker, Field.l, Message.s, 0)
EndProcedure
;============================================================================================================================
;
;============================================================================================================================
Procedure.s GetDriveLabel(drivename.s)
lpRootPathName.s = drivename.s
pVolumeNameBuffer.s = Space(256)
nVolumeNameSize.l = 256
lpVolumeSerialNumber.l
lpMaximumComponentLength.l
lpFileSystemFlags.l
lpFileSystemNameBuffer.s = Space(256)
nFileSystemNameSize.l = 256
Result = GetVolumeInformation_(lpRootPathName, pVolumeNameBuffer, 256, @lpVolumeSerialNumber, @lpMaximumComponentLength, @lpFileSystemFlags, lpFileSystemNameBuffer, 256)
ProcedureReturn LTrim(pVolumeNameBuffer)
EndProcedure
;============================================================================================================================
; See if an INI file exists in the program directory and create one if not
;============================================================================================================================
OsVer = OSVersion() ; Get current OS Version variable
Select OsVer
Case #PB_OS_Windows_NT3_51 : disableanimate = 0 ; API Animate window not supported
Case #PB_OS_Windows_95 : disableanimate = 0 ; API Animate window not supported
Case #PB_OS_Windows_NT_4 : disableanimate = 0 ; API Animate window not supported
Case #PB_OS_Windows_98 : disableanimate = 1 ; API Animate window supported
Case #PB_OS_Windows_ME : disableanimate = 1 ; API Animate window supported
Case #PB_OS_Windows_2000 : disableanimate = 1 ; API Animate window supported
Case #PB_OS_Windows_XP : disableanimate = 1 ; API Animate window supported
Case #PB_OS_Windows_Server_2003 : disableanimate = 1 ; API Animate window supported
Case #PB_OS_Windows_Future : disableanimate = 1 ; API Animate window supported
EndSelect
;============================================================================================================================
;
;============================================================================================================================
If Window_bakker()
;----------------------------------------------------------------------------------------------------------
; Setup window date and copyright
;----------------------------------------------------------------------------------------------------------
SetDate(#Window_bakker)
;----------------------------------------------------------------------------------------------------------
; Setup statusbar colours and icons
;----------------------------------------------------------------------------------------------------------
StatusBarIcon(#StatusBar_bakker, #StatusBar_bakker_messages, ImageID(#Image_bakker_messages)) ; Add the message and record statusbar icons
StatusBarIcon(#StatusBar_bakker, #StatusBar_bakker_records, ImageID(#Image_bakker_records))
;----------------------------------------------------------------------------------------------------------
; Setup screen and object tooltips now
;----------------------------------------------------------------------------------------------------------
MyBalloonTips(#Window_bakker, #Gadget_bakker_dirtree, "Single left click on an item in this tree to show files in that selected directory in the list to the right and double left click to send all files recursively to the backup list below")
MyBalloonTips(#Window_bakker, #Gadget_bakker_filetree, "Double left click to send the highlighted file to the backup list and double right click to launch it with the system associated shortcut")
MyBalloonTips(#Window_bakker, #Gadget_bakker_filebackup, "Double left click on an item in this list to delete it from the backup list")
MyBalloonTips(#Window_bakker, #Gadget_bakker_bsave, "Click this button to save all the selected files and setting to a backup control file")
MyBalloonTips(#Window_bakker, #Gadget_bakker_brun, "Click this button to run the backup job now")
MyBalloonTips(#Window_bakker, #Gadget_bakker_blocation, "Click this button to set the location for the backup job")
MyBalloonTips(#Window_bakker, #Gadget_bakker_cbdateyear, "Check this radio button to set the base backup name using the format ddmmyyyy")
MyBalloonTips(#Window_bakker, #Gadget_bakker_cbdayhour, "Check this radio button to set the base backup name using the format ddmmyyyy:hhmm")
MyBalloonTips(#Window_bakker, #Gadget_bakker_cblocation, "Check this radio button to allow the backup to only be performed to the named volume")
MyBalloonTips(#Window_bakker, #Gadget_bakker_location, "This is the drive and directory that the backup job is currently set to and will only work if filled!")
MyBalloonTips(#Window_bakker, #Gadget_bakker_lvolume, "This is the label of the drive to which you are allowed to backup to")
AddKeyboardShortcut(#Window_bakker, #PB_Shortcut_Delete, #Shortcut_bakker_Delete)
SplitterGadget(#Splitter_Bakker_Vertical, 0, 0, 800, 260, #Gadget_bakker_dirtree, #Gadget_bakker_filetree, #PB_Splitter_Vertical|#PB_Splitter_Separator)
SetGadgetState(#Splitter_Bakker_Vertical, 203)
SplitterGadget(#Splitter_Bakker_Horizontal, 0, 0, 800, 520, #Splitter_Bakker_Vertical, #Gadget_bakker_filebackup, #PB_Splitter_Separator)
SetActiveWindow(#Window_bakker)
;----------------------------------------------------------------------------------------------------------
; Read in config items if present
;----------------------------------------------------------------------------------------------------------
If FileSize("Bakker batch job.txt") <> -1
program\fileid = ReadFile(#PB_Any, "Bakker batch job.txt")
ReadString(program\fileid) ; Read config start heading, just junk string
program\backupto = StringField(ReadString(program\fileid), 2, "=")
SetGadgetText(#Gadget_bakker_location, program\backupto)
program\dateformat = StringField(ReadString(program\fileid), 2, "=")
If program\dateformat = "ddmmyyyy-hhmm"
SetGadgetState(#Gadget_bakker_cbdayhour, 1)
ElseIf program\dateformat = "ddmmyyyy"
SetGadgetState(#Gadget_bakker_cbdateyear, 1)
EndIf
program\volforce = StringField(ReadString(program\fileid), 2, "=")
If program\volforce = "Yes"
SetGadgetState(#Gadget_bakker_cblocation, 1)
Else
SetGadgetState(#Gadget_bakker_cblocation, 0)
EndIf
program\volume = StringField(ReadString(program\fileid), 2, "=")
SetGadgetText(#Gadget_bakker_lvolume, "Volume: [" + program\volume + "]")
program\filecounter = Val(StringField(ReadString(program\fileid), 2, "=")) :
ReadString(program\fileid) ; Read config end heading, just junk string
ClearGadgetItemList(#Gadget_bakker_filebackup)
For FilesIn.l = 0 To program\filecounter - 1
program\curfile = ReadString(program\fileid)
AddGadgetItem(#Gadget_bakker_filebackup, -1, program\curfile + Chr(10) + "Loaded")
SetGadgetItemColor(#Gadget_bakker_filebackup, FilesIn, #PB_Gadget_FrontColor, $7CE383, 1)
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, FilesIn.l, 0)
While WindowEvent() : Wend
SetStat(#StatusBar_bakker_messages, "Loaded: " + program\curfile) ; Show failed in statusbar
SetStat(#StatusBar_bakker_records, "File: " + Str(FilesIn)) ;
Next FilesIn.l
CloseFile(program\fileid)
program\fileid = -1
EndIf
;----------------------------------------------------------------------------------------------------------
; Set the program quit semaphore
;----------------------------------------------------------------------------------------------------------
program\progquit = 0
;----------------------------------------------------------------------------------------------------------
; Now start monitoring events
;----------------------------------------------------------------------------------------------------------
Repeat
Select WaitWindowEvent()
Case #PB_Event_CloseWindow
If EventWindow() = #Window_bakker
program\progquit = 1
EndIf
Case #PB_Event_Menu
Select EventMenu()
Case #Shortcut_bakker_Delete : Gosub DeleteFromBackup
EndSelect
Case #PB_Event_Gadget
Select EventGadget()
Case #Gadget_bakker_dirtree
Select EventType()
Case #PB_EventType_LeftClick : Gosub ShowFilesFromTree
Case #PB_EventType_LeftDoubleClick : Gosub GetDirsFromTree
Case #PB_EventType_RightDoubleClick :
Case #PB_EventType_RightClick :
EndSelect
Case #Gadget_bakker_filetree
Select EventType()
;Case #PB_EventType_LeftClick
Case #PB_EventType_LeftDoubleClick : Gosub GetFilesFromList
Case #PB_EventType_RightDoubleClick : Gosub RunAFile
Case #PB_EventType_RightClick :
EndSelect
Case #Gadget_bakker_filebackup
Select EventType()
;Case #PB_EventType_LeftClick
Case #PB_EventType_LeftDoubleClick : Gosub DeleteFileFromList
Case #PB_EventType_RightDoubleClick :
Case #PB_EventType_RightClick :
EndSelect
Case #Gadget_bakker_bsave : Gosub SaveSettingsAndFiles
Case #Gadget_bakker_brun : Gosub RunBackupJob
Case #Gadget_bakker_blocation : Gosub GetBackupLocation
Case #Gadget_bakker_cbdateyear : Gosub GetDateFormat
Case #Gadget_bakker_cbdayhour : Gosub GetDateFormat
Case #Gadget_bakker_cblocation : Gosub GetVolumeForce
EndSelect
EndSelect
Until program\progquit
CloseWindow(#Window_bakker)
EndIf
End
;============================================================================================================================
ShowFilesFromTree: ;
;============================================================================================================================
SetGadgetText(#Gadget_bakker_filetree, GetGadgetText(#Gadget_bakker_dirtree))
Return
;============================================================================================================================
GetDirsFromTree: ;
;============================================================================================================================
SearchEngine(GetGadgetText(#Gadget_bakker_dirtree))
Return
;============================================================================================================================
GetFilesFromList: ;
;============================================================================================================================
If GetGadgetState(#Gadget_bakker_filetree) <> -1
program\filecounter + 1
program\curfile = GetGadgetText(#Gadget_bakker_filetree) + GetGadgetItemText(#Gadget_bakker_filetree, GetGadgetState(#Gadget_bakker_filetree),0)
AddGadgetItem(#Gadget_bakker_filebackup, -1, program\curfile + Chr(10) + "", ImageID(#Image_bakker_listfiles))
SetStat(#StatusBar_bakker_messages, "Added: " + program\curfile)
SetStat(#StatusBar_bakker_records, "File: " + Str(program\filecounter))
EndIf
Return
;============================================================================================================================
RunAFile: ;
;============================================================================================================================
If GetGadgetState(#Gadget_bakker_filetree) <> -1
program\curfile = GetGadgetText(#Gadget_bakker_filetree) + GetGadgetItemText(#Gadget_bakker_filetree, GetGadgetState(#Gadget_bakker_filetree),0)
RunProgram(program\curfile, "", "", 1 | 2)
EndIf
Return
;============================================================================================================================
DeleteFileFromList: ;
;============================================================================================================================
If GetGadgetState(#Gadget_bakker_filebackup) <> -1
program\curfile = GetGadgetText(#Gadget_bakker_filebackup)
If DeleteFile(program\curfile) <> 0
program\filecounter -1
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_DELETEITEM, GetGadgetState(#Gadget_bakker_filebackup), 0) ; Delete it now
SetStat(#StatusBar_bakker_messages, "Deleted: " + program\curfile)
SetStat(#StatusBar_bakker_records, "File: " + Str(program\filecounter))
EndIf
EndIf
Return
;============================================================================================================================
GetBackupLocation: ;
;============================================================================================================================
program\backupto = PathRequester("Select backup path", "")
If program\backupto <> ""
program\volume = GetDriveLabel(Left(program\backupto, 3))
SetGadgetText(#Gadget_bakker_lvolume, "Volume: [" + program\volume + "]")
SetGadgetText(#Gadget_bakker_location, program\backupto)
EndIf
Return
;============================================================================================================================
GetDateFormat: ;
;============================================================================================================================
If GetGadgetState(#Gadget_bakker_cbdateyear) = 1
program\dateformat = "ddmmyyyy"
ElseIf GetGadgetState(#Gadget_bakker_cbdayhour) = 1
program\dateformat = "ddmmyyyy-hhmm"
EndIf
Return
;============================================================================================================================
GetVolumeForce:
;============================================================================================================================
If GetGadgetState(#Gadget_bakker_cblocation) = 1
program\volforce = "Yes"
EndIf
Return
;============================================================================================================================
SaveSettingsAndFiles: ;
;============================================================================================================================
Gosub GetDateFormat
Gosub GetVolumeForce
If program\backupto = ""
SetStat(#StatusBar_bakker_messages, "Error: Backup location has not been set, nothing saved")
Return
EndIf
If program\dateformat = ""
SetStat(#StatusBar_bakker_messages, "Error: Output date format has not been selected, nothing saved")
Return
EndIf
If program\filecounter = 0
SetStat(#StatusBar_bakker_messages, "Error: There are no files in the backup list, nothing saved")
Return
EndIf
program\fileid = CreateFile(#PB_Any, "Bakker batch job.txt")
WriteStringN(program\fileid, "[Begin Config]")
WriteStringN(program\fileid, "Backup To =" + program\backupto)
WriteStringN(program\fileid, "Date Format =" + program\dateformat)
WriteStringN(program\fileid, "Volume Force =" + program\volforce)
WriteStringN(program\fileid, "Volume Name =" + program\volume)
WriteStringN(program\fileid, "Number Of Files =" + Str(program\filecounter))
WriteStringN(program\fileid, "[End Config]")
For FilesOut.l = 0 To program\filecounter - 1
program\curfile = GetGadgetItemText(#Gadget_bakker_filebackup, FilesOut, 0)
WriteStringN(program\fileid, program\curfile)
SetStat(#StatusBar_bakker_messages, "Saved: " + program\curfile)
SetStat(#StatusBar_bakker_records, "File: " + Str(FilesOut))
Next FilesOut.l
CloseFile(program\fileid)
program\fileid = -1
SetStat(#StatusBar_bakker_messages, "Information: All configuration options and backup filenames have been saved")
Return
;============================================================================================================================
RunBackupJob:
;============================================================================================================================
Gosub GetDateFormat
Gosub GetVolumeForce
If program\backupto = ""
SetStat(#StatusBar_bakker_messages, "Error: Backup location has not been set, nothing saved")
Return
EndIf
If program\dateformat = ""
SetStat(#StatusBar_bakker_messages, "Error: Output date format has not been selected, nothing saved")
Return
EndIf
If program\filecounter = 0
SetStat(#StatusBar_bakker_messages, "Error: There are no files in the backup list, nothing saved")
Return
EndIf
If program\volforce = "Yes" And program\volume <> GetDriveLabel(Left(program\backupto, 3))
SetStat(#StatusBar_bakker_messages, "Error: Designated volume label doesn't match current inserted media")
Return
EndIf
If program\dateformat = "ddmmyyyy"
program\dirdate = FormatDate("%dd%mm%yyyy", Date())
ElseIf program\dateformat = "ddmmyyyy-hhmm"
program\dirdate = FormatDate("%dd%mm%yyyy-%hh%ii", Date())
EndIf
program\newpath = program\backupto + program\dirdate
MakeSureDirectoryPathExists_(program\newpath)
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, 0, 0)
For FilesOut.l = 0 To program\filecounter - 1
program\curfile = GetGadgetItemText(#Gadget_bakker_filebackup, FilesOut, 0) ; C:\Stuff\Jobs.txt
program\oldpath = GetPathPart(program\curfile) ; C:\Stuff\
program\oldpath = Mid(program\curfile, 3, Len(program\curfile) - 2) ; \Stuff\
MakeSureDirectoryPathExists_(program\newpath + program\oldpath)
If CopyFile(program\curfile, program\newpath + program\oldpath + GetFilePart(program\curfile)) <> 0
SetGadgetItemText(#Gadget_bakker_filebackup, FilesOut.l, "Processed", 1)
SetGadgetItemColor(#Gadget_bakker_filebackup, FilesOut, #PB_Gadget_FrontColor, $D3592C, 1)
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, FilesOut.l, 0)
While WindowEvent() : Wend
SetStat(#StatusBar_bakker_messages, "Copied: " + program\curfile)
SetStat(#StatusBar_bakker_records, "File: " + Str(FilesOut))
Else
SetGadgetItemText(#Gadget_bakker_filebackup, FilesOut.l, "Not Copied", 1) ; Failed to copy
SetGadgetItemColor(#Gadget_bakker_filebackup, FilesOut, #PB_Gadget_FrontColor, $0613F9, 1) ; Show in red
While WindowEvent() : Wend ; Flush events
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, FilesOut.l, 0) ; Line always visible
SetStat(#StatusBar_bakker_messages, "Not Copied: " + program\curfile) ; Show failed in statusbar
SetStat(#StatusBar_bakker_records, "File: " + Str(FilesOut)) ;
EndIf
Next
Return
;============================================================================================================================
DeleteFromBackup:
;============================================================================================================================
For FilesDel.l = program\filecounter To 0 Step -1
If GetGadgetItemState(#Gadget_bakker_filebackup, FilesDel) & #PB_ListIcon_Selected
RemoveGadgetItem(#Gadget_bakker_filebackup, FilesDel.l)
SendMessage_(GadgetID(#Gadget_bakker_filebackup), #LVM_ENSUREVISIBLE, FilesDel.l, 0)
program\filecounter - 1
SetStat(#StatusBar_bakker_records, "File: " + Str(program\filecounter))
EndIf
Next
Return
Code: Select all
;============================================================================================================================
;
;============================================================================================================================
Declare MyBalloonTips(btWindow.l, btGadget.l, btText.s) ; Custom balloon tooltips.
Declare.s GetDriveLabel(drivename.s) ; Get the drive label for a drive name
;============================================================================================================================
;
;============================================================================================================================
Enumeration 1
#Window_bclient
EndEnumeration
#WindowIndex = #PB_Compiler_EnumerationValue
Enumeration 1
#Gadget_bclient_bbackup
#Shortcut_bclient_exit
EndEnumeration
#GadgetIndex = #PB_Compiler_EnumerationValue
;============================================================================================================================
; My personal constants
;============================================================================================================================
#Version = "v0.00" ; Program version
#CopyRight = "<°)))o><²³ Baker Client(c) 2006, PeriTek Visions " + #Version ; Copyright string
#Eol = Chr(10) + Chr(13) ; End of line marker
;============================================================================================================================
; Window data structure
;============================================================================================================================
Structure windowdata ; Window structure data
winhandle.l ; Main window handle
statushandle.l ; Statusbar handle
mutex.l ; Prevent multiple windows from opening
EndStructure
;==============================================================================================================================
; Program data structure
;==============================================================================================================================
Structure programdata ; Program data structure
curdir.s ; Current program startup directory
progquit.l ; User quit the program, so set the quit value to allow program to end repeat loop
curline.l ; Always the current line in the list object
daynum.l ; Numerical day of the week mapped to word format
backupto.s
volume.s
dateformat.s
volforce.s
fileid.l
filecounter.l
dirdate.s
newpath.s
oldpath.s
backup.s
EndStructure
;==============================================================================================================================
; All global variables
;==============================================================================================================================
Global program.programdata, form.windowdata, NewList FileList.s()
;==============================================================================================================================
; Get current direectory and store it for later
;==============================================================================================================================
program\curdir = Space(512) ; Give the variable enough space
If GetCurrentDirectory_(Len(program\curdir), @program\curdir) <> 0 ; Get the current directory
If Right(program\curdir, 1) <> "\" ; Each O/S does it differently so check for backspace
program\curdir + "\"
EndIf
EndIf
;============================================================================================================================
;
;============================================================================================================================
Procedure.l Window_bclient()
If OpenWindow(#Window_bclient,205,235,160,140,#PB_Window_BorderLess|#PB_Window_ScreenCentered|#PB_Window_Invisible,"Bakker Client")
If CreateGadgetList(WindowID(#Window_bclient))
ButtonGadget(#Gadget_bclient_bbackup,10,10,140,120,"Backup")
SetGadgetFont(#Gadget_bclient_bbackup,LoadFont(#Gadget_bclient_bbackup,"Arial",26,256))
HideWindow(#Window_bclient,0)
ProcedureReturn WindowID(#Window_bclient)
EndIf
EndIf
EndProcedure
;============================================================================================================================
; Personal balloon tooltip window, colourful and not boring at all
;============================================================================================================================
Procedure MyBalloonTips(btWindow.l, btGadget.l, btText.s)
ToolTipControl = CreateWindowEx_(0, "ToolTips_Class32", "", $D0000000 | $40, 0, 0, 0, 0, WindowID(btWindow), 0, GetModuleHandle_(0), 0)
SendMessage_(ToolTipControl, 1044, 0, 0)
SendMessage_(ToolTipControl, 1043, $F3D97A, 0)
SendMessage_(ToolTipControl, 1048, 0, 180)
Button.TOOLINFO\cbSize = SizeOf(TOOLINFO)
Button\uFlags = $11
Button\hWnd = GadgetID(btGadget)
Button\uId = GadgetID(btGadget)
Button\lpszText = @btText
SendMessage_(ToolTipControl, $0404, 0, Button)
EndProcedure
;============================================================================================================================
;
;============================================================================================================================
Procedure.s GetDriveLabel(drivename.s)
lpRootPathName.s = drivename.s
pVolumeNameBuffer.s = Space(256)
nVolumeNameSize.l = 256
lpVolumeSerialNumber.l
lpMaximumComponentLength.l
lpFileSystemFlags.l
lpFileSystemNameBuffer.s = Space(256)
nFileSystemNameSize.l = 256
Result = GetVolumeInformation_(lpRootPathName, pVolumeNameBuffer, 256, @lpVolumeSerialNumber, @lpMaximumComponentLength, @lpFileSystemFlags, lpFileSystemNameBuffer, 256)
ProcedureReturn LTrim(pVolumeNameBuffer)
EndProcedure
;============================================================================================================================
;
;============================================================================================================================
If Window_bclient()
AddKeyboardShortcut(#Window_bclient, #PB_Shortcut_Alt | #PB_Shortcut_X, #Shortcut_bclient_exit)
program\progquit = 0
MyBalloonTips(#Window_bclient, #Gadget_bclient_bbackup, "Press this button to start the backup. Click and hold on the button's grey borders to move this button and press ALT + X to exit this window")
SetActiveGadget(#Gadget_bclient_bbackup)
;----------------------------------------------------------------------------------------------------------
; Read in config items if present
;----------------------------------------------------------------------------------------------------------
If FileSize("Bakker batch job.txt") <> -1
program\fileid = ReadFile(#PB_Any, "Bakker batch job.txt")
ReadString(program\fileid)
program\backupto = StringField(ReadString(program\fileid), 2, "=")
program\dateformat = StringField(ReadString(program\fileid), 2, "=")
program\volforce = StringField(ReadString(program\fileid), 2, "=")
program\volume = StringField(ReadString(program\fileid), 2, "=")
program\filecounter = Val(StringField(ReadString(program\fileid), 2, "="))
ReadString(program\fileid)
For FilesIn.l = 0 To program\filecounter - 1
AddElement(FileList.s())
FileList.s() = ReadString(program\fileid)
Next FilesIn.l
CloseFile(program\fileid)
program\fileid = -1
MessageRequester("Information","Configuration file and list of files loaded. Backup is ready to go", #PB_MessageRequester_Ok | #MB_ICONINFORMATION)
Else
MessageRequester("Error","Configuration file and list of files not found. Program will now exit", #PB_MessageRequester_Ok | #MB_ICONERROR)
End
EndIf
Repeat
Select WaitWindowEvent()
Case #PB_Event_CloseWindow
If EventWindow() = #Window_bclient
program\progquit = 1
EndIf
Case #WM_LBUTTONDOWN
SendMessage_(WindowID(#Window_bclient), #WM_NCLBUTTONDOWN, #HTCAPTION, 0)
Case #PB_Event_Menu
Select EventMenu()
Case #Shortcut_bclient_exit : program\progquit = 1
EndSelect
Case #PB_Event_Gadget
Select EventGadget()
Case #Gadget_bclient_bbackup : Gosub RunBackupJob
EndSelect
EndSelect
Until program\progquit
CloseWindow(#Window_bclient)
EndIf
End
;============================================================================================================================
RunBackupJob:
;============================================================================================================================
If program\backup = "Done"
If MessageRequester("Error","Backup has already been done, are you sure you want to do it again?", #PB_MessageRequester_YesNo | #MB_ICONERROR) = #PB_MessageRequester_Yes
program\backup = ""
Else
Return
EndIf
EndIf
If program\backupto = ""
MessageRequester("Error","Configuration file has nowhere to backup to specified. Program will now exit", #PB_MessageRequester_Ok | #MB_ICONERROR)
End
EndIf
If program\dateformat = ""
MessageRequester("Error","Configuration file does not have the backup date format se. Program will now exit", #PB_MessageRequester_Ok | #MB_ICONERROR)
End
EndIf
If program\filecounter = 0
MessageRequester("Error","Configuration file has has no files to process, file counter was 0. Program will now exit", #PB_MessageRequester_Ok | #MB_ICONERROR)
End
EndIf
If program\volforce = "Yes" And program\volume <> GetDriveLabel(Left(program\backupto, 3))
MessageRequester("Error","Designated volume label doesn't match current inserted media. Program will now exit", #PB_MessageRequester_Ok | #MB_ICONERROR)
End
EndIf
If program\dateformat = "ddmmyyyy"
program\dirdate = FormatDate("%dd%mm%yyyy", Date())
ElseIf program\dateformat = "ddmmyyyy-hhmm"
program\dirdate = FormatDate("%dd%mm%yyyy-%hh%ii", Date())
EndIf
program\newpath = program\backupto + program\dirdate
MakeSureDirectoryPathExists_(program\newpath)
ForEach FileList.s()
FilesOut.l = ListIndex(FileList.s())
program\oldpath = GetPathPart(FileList.s()) ; C:\Stuff\
program\oldpath = Mid(FileList.s(), 3, Len(FileList.s()) - 2) ; \Stuff\
MakeSureDirectoryPathExists_(program\newpath + program\oldpath)
If CopyFile(FileList.s(), program\newpath + program\oldpath + GetFilePart(FileList.s())) <> 0
SetGadgetText(#Gadget_bclient_bbackup, Str(FilesOut.l))
SetGadgetColor(#Gadget_bclient_bbackup, #PB_Gadget_FrontColor, $D3592C)
While WindowEvent() : Wend
Else
SetGadgetText(#Gadget_bclient_bbackup, Str(FilesOut.l)) ; Failed to copy
SetGadgetColor(#Gadget_bclient_bbackup, #PB_Gadget_FrontColor, $0613F9) ; Show in red
SetWindowColor(#Window_bclient, $0613F9)
While WindowEvent() : Wend ; Flush events
EndIf
Next
SetGadgetText(#Gadget_bclient_bbackup, "Backup")
MessageRequester("Information","File backup finished successfully. Have a nice day!", #PB_MessageRequester_Ok | #MB_ICONINFORMATION)
program\backup = "Done"
Return
(don't need to answer)
