PureBasic Forums - English

Posted: **Fri Sep 06, 2013 10:50 am**

ClearStructure() is only needed if you call InitializeStructure() somewhen (After AllocateMemory() for example). Beside that, all is automatically managed by PB.

Posted: **Fri Sep 06, 2013 10:56 am**

sec wrote: I get macro error:

Thanks. I did left an old param for catchimage() not present anymore. Hope it's ok now.

And yes, noleak catches only one class of macroscopic errors basically... (mismatched allocations/deallocations through allocatememory/freememory). It's a very limited tool.
It can help in some cases, but cannot do what you can do manually, and I feel trying to add more "intelligence" to it would cause more false reports than not.
For GDI leakages look at the GDIView tool mentioned in my first post (it can't tell you were they are in your code but it can help to verify their presence and the kind of objects leaking).

Posted: **Mon Sep 09, 2013 2:02 am**

Thank you much luis for sharing this program, and infratec for your addin part.
I like this NoLeak detector, as it helps me correct mistakes that lead to leak errors in my programs.
But I like infratec's approach for more location detail. But for what it's worth, I also added the line
'text' to the problem causing line number for a quick reference with out having to go to the line to
see what's wrong. It is in the following code. Just add to luis's source as infratec says on page 2.
I posted it here in case anyone else wants to use it too.

Code: Select all

  
  ;{ DebugNoLeak()
  Procedure DebugNoLeak()
    
    Shared NoLeak_FONT(), NoLeak_ALLOC(), NoLeak_IMAGE()
    Protected i,TheSource$,lp.i,TmpFile$,line_pos.i,thedat$
    
    i = 0
    
    If ListSize(NoLeak_FONT())
      Debug ""
      Debug "NoLeak Font:"
      Debug ""
      ForEach NoLeak_FONT()
        i + 1
        Debug "(" + Str(i) + ") " + "File: " + NoLeak_FONT()\Source$
        line_pos=NoLeak_FONT()\iLine
        TheSource$=NoLeak_FONT()\Source$
        TmpFile$ = GetPathPart(TheSource$)+"tmp.txt"
        While CopyFile(TheSource$, TmpFile$)=0:Wend
        ReadFile(1,TmpFile$)
        lp=0
        While Eof(1) = 0
          thedat$=ReadString(1)
          lp=lp+1
          If lp=line_pos
            Debug "(" + Str(i) + ") " + "Line: " + Str(line_pos)+"  "+thedat$
            Break
          EndIf
        Wend
        CloseFile(1)
        DeleteFile(TmpFile$)
        Debug "(" + Str(i) + ") " + "ID: " + Str(NoLeak_FONT()\iFontNum)
        Debug "(" + Str(i) + ") " + "Name: " + NoLeak_FONT()\Filename$
        Debug "(" + Str(i) + ") " + "Size: " + Str(NoLeak_FONT()\iYsize)
        Debug ""
      Next
      Debug "----------------------------"
    EndIf
    
    If ListSize(NoLeak_ALLOC())
      Debug ""
      Debug "NoLeak Alloc:"
      Debug ""
      ForEach NoLeak_ALLOC()
        i + 1
        Debug "(" + Str(i) + ") " + "File: " + NoLeak_ALLOC()\Source$
        line_pos=NoLeak_ALLOC()\iLine
        TheSource$=NoLeak_ALLOC()\Source$
        TmpFile$ = GetPathPart(TheSource$)+"tmp.txt"
        While CopyFile(TheSource$, TmpFile$)=0:Wend
        ReadFile(1,TmpFile$)
        lp=0
        While Eof(1) = 0
          thedat$=ReadString(1)
          lp=lp+1
          If lp=line_pos
            Debug "(" + Str(i) + ") " + "Line: " + Str(line_pos)+"  "+thedat$
            Break
          EndIf
        Wend
        CloseFile(1)
        DeleteFile(TmpFile$)
        Debug "(" + Str(i) + ") " + "Address: " + Str(NoLeak_ALLOC()\iAddress)
        Debug "(" + Str(i) + ") " + "Size: " + Str(NoLeak_ALLOC()\iBytes)
        Debug ""
      Next
      Debug "----------------------------"
    EndIf
    
    If ListSize(NoLeak_IMAGE())
      Debug ""
      Debug "NoLeak Image:"
      Debug ""
      ForEach NoLeak_IMAGE()
        i + 1
        Debug "(" + Str(i) + ") " + "File: " + NoLeak_IMAGE()\Source$
        line_pos=NoLeak_IMAGE()\iLine
        TheSource$=NoLeak_IMAGE()\Source$
        TmpFile$ = GetPathPart(TheSource$)+"tmp.txt"
        While CopyFile(TheSource$, TmpFile$)=0:Wend
        ReadFile(1,TmpFile$)
        lp=0
        While Eof(1) = 0
          thedat$=ReadString(1)
          lp=lp+1
          If lp=line_pos
            Debug "(" + Str(i) + ") " + "Line: " + Str(line_pos)+"  "+thedat$
            Break
          EndIf
        Wend
        CloseFile(1)
        DeleteFile(TmpFile$)
        Debug "(" + Str(i) + ") " + "ID: " + Str(NoLeak_IMAGE()\iImageNum)
        Debug "(" + Str(i) + ") " + "Width: " + Str(NoLeak_IMAGE()\iWidth)
        Debug "(" + Str(i) + ") " + "Height: " + Str(NoLeak_IMAGE()\iHeight)
        Debug "(" + Str(i) + ") " + "Depth: " + Str(NoLeak_IMAGE()\iDepth)
        Debug ""
      Next
      Debug "----------------------------"
    EndIf
    
    If i > 0
      Debug "NoLeak found " + Str(i) + " leaks!"
    Else
      Debug "NoLeak found no leaks!"
    EndIf
    
  EndProcedure
  ;}
  
CompilerElse
  Macro DebugNoLeak()
  EndMacro

yrreti

Posted: **Thu Sep 19, 2013 6:51 pm**

@luis:
If you change the line

Code: Select all

Macro CreateImage (iImageNum, iWidth, iHeight, iDepth = 24, iBackColor = #Black)

to:

Code: Select all

Macro CreateImage (iImageNum, iWidth, iHeight, iDepth = 24, iBackColor = RGB(0,0,0))

it works also on Mac OS X (and probably GNU/Linux).

Posted: **Thu Sep 19, 2013 7:37 pm**

@Danilo

I changed it, thanks.

Posted: **Wed Jun 01, 2016 12:34 am**

Thanks, nice memory-related addition to Purifier and really cool stuff, -1 way to be a fool [million remains]

PureBasic Forums - English

NoLeak - include to help you find memory leaks (PB5.20)

Re: NoLeak - include to help you find memory leaks (1.4)

Re: NoLeak - include to help you find memory leaks (1.3)

Re: NoLeak - include to help you find memory leaks (1.4)

Re: NoLeak - include to help you find memory leaks (PB5.20)

Re: NoLeak - include to help you find memory leaks (PB5.20)

Re: NoLeak - include to help you find memory leaks (PB5.20)