jaPBe - 1.4.1.31

Developed or developing a new product in PureBasic? Tell the world about it.
ricardo
Addict
Addict
Posts: 2438
Joined: Fri Apr 25, 2003 7:06 pm
Location: Argentina

Post by ricardo »

@cor

im agree with you.

@danilo

you are a very nice guy and an excellent programmer but dont need to be rude.
GPI is making a very good editor and he is giving it for free, so what is the problem.

The case if someone steal some code (not take it from tip and tricks) and just change the name and try to sell it is different i think.

But taking some part for here and there and making a new application is not stealing it.

Finally this is a public place and if someone put some code here must know that the code could be used and its hard to remember which part was taken from where (and who writes it).

<<Maybe the forum must have some agreement that points that every code published here is public and could be used without any restrictions.>>

* Do i need to mention here my english teachers and give them some credits? 8O
No, i know they should feel shame for my lame english :roll:

Dont take it in the hard way Danilo :wink:

Lets be happy!
ARGENTINA WORLD CHAMPION
Karbon
PureBasic Expert
PureBasic Expert
Posts: 2010
Joined: Mon Jun 02, 2003 1:42 am
Location: Ashland, KY
Contact:

Post by Karbon »

Many thanks to *.* for putting up with my stupid questions over the last few months!
-Mitchell
Check out kBilling for all your billing software needs!
http://www.k-billing.com
Code Signing / Authenticode Certificates (Get rid of those Unknown Publisher warnings!)
http://codesigning.ksoftware.net
GPI
PureBasic Expert
PureBasic Expert
Posts: 1394
Joined: Fri Apr 25, 2003 6:41 pm

Post by GPI »

Karbon wrote:Many thanks to *.* for putting up with my stupid questions over the last few months!
?!

Have i forgot something?
User avatar
blueznl
PureBasic Expert
PureBasic Expert
Posts: 6166
Joined: Sat May 17, 2003 11:31 am
Contact:

Post by blueznl »

karbon is just going for a pre-emptive strike to give credit where credit is due :-) and avoid any claims :P

8)
( PB6.00 LTS Win11 x64 Asrock AB350 Pro4 Ryzen 5 3600 32GB GTX1060 6GB)
( The path to enlightenment and the PureBasic Survival Guide right here... )
Dare2
Moderator
Moderator
Posts: 3321
Joined: Sat Dec 27, 2003 3:55 am
Location: Great Southern Land

Post by Dare2 »

:lol: @ last 2 posts.

Too funny. :D
Karbon
PureBasic Expert
PureBasic Expert
Posts: 2010
Joined: Mon Jun 02, 2003 1:42 am
Location: Ashland, KY
Contact:

Post by Karbon »

Sorry, didn't mean to confuse anyone..

I was just saying thanks to everyone, again :-)
-Mitchell
Check out kBilling for all your billing software needs!
http://www.k-billing.com
Code Signing / Authenticode Certificates (Get rid of those Unknown Publisher warnings!)
http://codesigning.ksoftware.net
GPI
PureBasic Expert
PureBasic Expert
Posts: 1394
Joined: Fri Apr 25, 2003 6:41 pm

Post by GPI »

Forgot:

Code: Select all

404:Use SDK instead of Win32.hlp
gnozal
PureBasic Expert
PureBasic Expert
Posts: 4229
Joined: Sat Apr 26, 2003 8:27 am
Location: Strasbourg / France
Contact:

Post by gnozal »

French language update :

Code: Select all

;Info: Written by gnozal (gnozal@zor.org) 
;Info: French / Français 
;jaPBe 1.4.1.31 Language File 

;° = Tab 
;^ = new Line 

;InfoBox 
;####### 
;welcome to japbe %ver% for %PBver% 
 0:Bienvenue à jaPBe version 
198:, éditeur pour Purebasic version 
 1:Chargement du fichier 
13:Enregistrement du fichier 
10:Chargement des définitions 
 2:Terminé. 
11:Mise à jour du style 
40:Fermer 
41:Enregistrement des définitions 
42:Chargement de la liste des fichiers 
43:Liste des fichiers chargée. 
44:Enregistrer la liste des fichiers 
45:Liste des fichiers enregistrée. 
108:Enregistrement du fichier Declare 
133:Enregistrement du bloc 
134:Chargement du bloc 
211:Démarrage du plugin 

;Messages 
;######## 
 4:Chargement impossible 
14:Enregistrement impossible 
34:Le fichier existe déjà.^Voulez-vous l'écraser? 
35:Un répertoire de même nom existe déjà. 
36:Le fichier a été modifié.^Voulez-vous l'enregistrer? 
110:Désolé ; les éléments pliés sont protégés contre l'écriture! 
 3:Mémoire insuffisante! 
245:Désolé, le visualisateur de structures a planté.^Il a été refermé... 
246:Ce type de fichier est inconnu de jaPBe!^Voulez-vous vraiment le charger? 
247:Fichier inclus introuvable. 
385:Ce nom de projet existe déjà ! 
377:Créer une ressource 
386:Saisir le nom du projet (sans extension !) : 
387:Nom invalide 
399:Le manuel est introuvable... 

;Main-Window / Editor 
;#################### 

;Tab 
;---- 
12:<nouveau> 
378:<ressource> 

;List-Panel 
;----------- 
19:Signet 
20:Var 
21:Const 
22:Struct 
23:Proc 
;Bookmark 
24:Non trié 
25:Trié : vers le haut 
26:Trié : vers le bas 
27:Groupé 

;main-menu 
;######### 
28:Fichier 
;-------- 
379:Nouveau 
380:<sans nom>°Ctrl+N 
381:Projet 
382:Fichier inclus 
383:Fichier principal 
384:Fichier ressource 
30:Ouvrir...°Ctrl+O 
347:Ouvrir une sauvegarde...°Alt+O 
31:Enregistrer°Ctrl+S 
32:Enregistrer sous...°F12 
33:Enregistrer tout 
37:Fermer°Ctrl+W 
38:Fermer tous 
39:Enregistrer comme définition... 
107:Enregistrer comme déclaration... 
302:Imprimer... 
46:Charger liste de fichiers... 
47:Enregistrer liste de fichiers... 
75:Préférences...°Ctrl+P 
96:Fichiers récents 
394:Liste de fichiers 
97:Quitter °Alt+F4 

15:Edition 
;-------- 
16:Annuler°Ctrl+Z 
17:Répéter°Ctrl+Y 
18:Couper°Ctrl+X 
99:Copier°Ctrl+C 
100:Coller°Ctrl+V 
101:Insérer Bloc de commentaires°Ctrl+B 
102:Supprimer Bloc de commentaires°Alt+B 
103:Augmenter Indentation°Tab 
104:Diminuer Indentation°Shift+Tab 
105:Indentation automatique°Ctrl+Tab 
131:Enregistrer Bloc... 
132:Charger Bloc... 
106:Sélectionner tout°Ctrl+A 

111:Chercher 
;-------- 
112:Chercher/Remplacer...°Ctrl+F 
113:Chercher suivant°F3 
114:Aller à la ligne...°Ctrl+G 

127:Pliage 
;-------- 
128:(Dé)plier°Ctrl+D 
129:Plier tout°Alt+D 
130:Déplier tout°Alt+Shift+D 

360:Projet 
;------------ 
365:Options du projet 
364:Fichier principal : 
136:Compiler/Exécuter°F5 
388:Compiler/Déboguer°F6 
138:Exécuter 
326:Redémarrer le compilateur 
390:Créer un EXE...°F7 
392:Compiler manuellement...°Maj+F7 

194:Outils 
;--------- 
195:Visualisateur de structures°Alt+S 
205:Table Ascii°Alt+A 
206:Insérer une couleur°Alt+P 
288:Visualisateur de fichiers inclus°Alt+I 
299:Synchroniser les listes°Alt+L 
331:Calcul de la sélection°Alt+C 
350:Chercher une déclaration°Maj+F3 
;Config Tools 

181:Aide 
;-------- 
182:Aide...°F1 
398:Compiler manuellement... 
249:A propos de jaPBe... 

;PopUp-Menu 
;-------------- 
137:Document 
;Tools/Plugins 
183:Aide externe 
333:Aide de jaPBe 

;Color-PopUp 
;--------------- 
207:Copier comme RGB() 
208:Copier comme Hex (RGB) 
209:Copier comme Hex (BGR / Défaut) 

;ToolBar-Info 
;---------------- 
169:Nouveau fichier 
170:Ouvrir 
171:Enregistrer 
172:Fermer 
173:Couper 
174:Copier 
175:Coller 
176:Annuler 
177:Répéter 
178:Chercher 
290:Visualisateur de fichiers inclus 
180:Compiler/Exécuter 
389:Compiler/Déboguer 
391:Créer un EXE 

;Dialogbox general 
;################# 
68:Ok 
69:Annuler 
362:Aide 

303:Impression 
;######### 
305:Style d'impression 
;--------------- 
304:Utiliser le style suivant : 
306:Style identique : comme à l'écran 
307:Style modifié : couleurs inversées 
308:Style modifié : noir et blanc 
309:Style modifié : fond blanc 

310:Imprimer 
;--------- 
311:Tout le texte 
312:La sélection 

318:Marges additionnelles (mm) 
;-------------------------- 

319:En-tête (Fichier : %File% ; Page : %Side% ; Date : %Date% ou %Date-%) 
;----------------------------------------- 
320:Echanger gauche/droite pour les pages paires 
327:Multiplicateur pour la taille des caractères de l'en-tête : 

;Messages 
313:Application du style au texte... 
314:Impression en cours... 
315:Imprimante non trouvée! 

297:Synchroniser les listes 
;############### 
298:Vider 
301:Charger définitions... 

48:Préférences 
;############## 

 8:Généralités 
;----------- 
91:Langue 
397:Page de codes 
92:Une seule instance de jaPBe (redémarrage nécessaire) 
291:Charger le dernier projet au démarrage 
292:Charger un seul exemplaire d'un fichier 
93:Répertoire par défaut 
94:Répertoire de PureBasic 
95:Panneau d'informations : montrer les arguments des procédures dans les signets 
334:Synchronisation les listes en temps réel 
295:Cacher les fichiers de déclaration 
123:Rafraîchir toute la fenêtre (parfois nécessaire sous Win9x) 
124:Masquer automatiquement le panneau d'informations (comme la barre des tâches) 
189:Délai d'apparition : 
316:Création automatique d'un fichier de sauvegarde 
317:Cacher les sauvegardes 
325:Nombre maximum de sauvegardes : 
184:Associer .PB, .PBI, .PBFL avec jaPBe 
255:Annuler l'association avec jaPBe 
345:Sauvegarder tous les fichiers modifiés avant une compilation
404:Aide pour l'API Windows : utiliser le SDK à la place de Win32.hlp  
;Messages 
;------------ 
185:jaPBe est associé avec .PB, .PBI, .PBFL 
256:L'association des fichiers avec jaPBe a été annulée. 

67:Styles / Editeur 
;---------------- 
49:Défaut 
355:Opérateurs =+-*/ 
356:Séparateurs ()[] 
50:Variable 
51:Constante 
52:Nombre 
53:Structure 
54:Procédure 
55:Mot clé Basic 
56:Chaîne 
57:Commentaire 
58:Mnémonique ASM 
59:Signet ;- 
60:Titre ;/ 
61:Parenthèse () 
62:Parenthèse ERR() 
63:Numéro de ligne 
64:Indentation 
65:Ligne en cours 
66:Sélection 
70:Gras 
71:Italique 
72:Souligné 
73:Police 
74:Fond 
76:Toutes les polices 
77:Tous les fonds 
341:Signaler les parenthèses actives 
78:Distinguer la ligne en cours 
79:Activer la coloration syntaxique 
80:Montrer les guides d'indentation 
81:Montrer les espaces 
82:Montrer les fins de ligne (EOL) 
83:Montrer les numéros de ligne 
84:Montrer la marge d'indentation 

250:Enregistrer le style courant 
251:Sélection des styles 
252:Style courant 

186:Autres options 
;------------ 
187:Scrolling vers le haut au dépliage 
280:Scrolling vers le haut lors de la sélection d'un signet 
342:Ajuster automatiquement la largeur de la barre de défilement horizontale 
85:Changement de casse automatique 
86:Indentation automatique 
87:Limites de scrolling (distance par rapport au bord de l'écran) 
88:Horizontalement (Pixels) 
89:Verticalement (Lignes) 
90:Tabulations (Nombre de caractères) 
196:Compléter automatiquement les mots clés 
293:Compléter automatiquement If/Select/For/While/Repeat/Procedure*/Structure 

253:Fichier(s) de définitions 
;--------------- 
254:Ici, vous pouvez (dés)activer les fichiers de définitions.^(Un redémarrage de jaPBe est nécessaire). 
296:Information 
332:Recharger tous les fichiers de définitions 

403:Projet 
;---------- 

;Version 
;------- 
;Include is defined in the compile-options-section 
;------- 
322:Ici, vous pouvez sélectionner le(s) fichier(s) inclus par défaut^Ils seront ajoutés automatiquement à chaque nouveau document. 
;Info 

;ToolTip 
;----------- 
188:Ce paramétrage sera repris pour tous les autres styles 

284:Visualisateur de fichiers inclus 
;################## 
281:Type 
282:Nom 
283:Chemin 
285:Fichier 
286:Binaire 
287:Rafraîchir 
289:Montrer tous 

115:Chercher / Remplacer 
;################## 
116:Chercher : 
117:Remplacer par : 
118:Mots entiers 
119:(Maj/Min)uscules 
98:Caractères étendus 
358:Début fichier 
120:Suivant 
121:Remplacer 
122:Remplacer tout 
335:Fichier suivant 
;Messages/Popup 
;------------------ 
357:Déclaration introuvable. 
393:Fin de fichier atteinte 

126:Aller à la ligne 
;############# 

;398 Compile manual... 
;################################ 
329:Défaut 
395:Ajouter ressources 

;--Project Options 
;#################### 
;----------------- 
156:Fichier courant 

268:Généralités 
;----------- 
144:Icône : 
145:Activer l'assembleur en ligne 
146:Exécutable compatible NT4 
147:Activer le support des thèmes XP 
149:Argument(s) 
190:Activer le support des numéros de lignes pour OnError 
257:Inclure le Manifest (XP) 
363:Créer un fichier de déclarations 

;CPU-Type 
;------------ 
150:Tous les CPU 
151:CPU Dynamique 
152:CPU avec MMX 
153:CPU avec 3DNOW 
154:CPU avec SSE 
155:CPU avec SSE2 
148:Format de l'EXE : 
;---------------------- 
158:Windows 
159:Shared DLL 
160:Console 

361:Version 
;------------ 
258:Organisation 
259:Description 
260:Version 
261:Nom interne 
262:Copyright 
263:Nom d'origine 
264:E-Mail 
265:Web 
266:Commentaires 
275:Marques légales 
276:Nom du produit 
277:Version du produit 
278:Description compil. 
279:Description perso. 
267:Langue 
402:Variables JaPBe
;InfoBox/message 
;----------- 
352:%build% - retourne le numéro de build^%date% - date de compilation au format %dd.%mm.%yyyy^%date-% - date de compilation au format %yyyy-%mm-%dd^%year% - Année de compilation (2003)^%year0% - Année de compilation - 2000 (3)^%month% - Mois de compilation^%day% - Jour de compilation^%jaPBeVer% - Version de jaPBe^%exe% - Nom de l'EXE^%source% - Nom du code source 

321:Fichier(s) inclus 
;----------- 
;Info is defined in the preference 

370:Ressources 
;------------ 
366:Type 
367:Nom 
368:Langue 
369:Fichier 
371:Editer 
372:Supprimer 
373:Nouveau 

;Compiler errors 
;------------------- 
162:Le compilateur n'a pas démarré.^Vérifiez les préférences et relancez jaPBe. 
163:Erreur fatale du compilateur ! 
164:Erreur de l'assembleur ! 
165:Erreur à l'édition de liens ! 
167:Erreur du compilateur ! 
;InfoBox 
;----------- 
161:Compilation en cours... 
168:Création de l'exécutable... 
5:Initialisation du compilateur... 
6:Impossible d'initialiser le compilateur ! 
7:Chargement des fonctions PureBasic... 
9:Compilateur terminé. 
;To-Line-Message: 

374:Ajouter/Editer ressource 
;#################### 
;Messages 
;----------- 
375:Le nom de ressource est vide 
376:Le fichier de ressources est vide 

343:Calculatrice 
;############## 
344:Saisir les données à calculer (ex: 2*1024) 

191:Visualisateur de structures 
;#################### 
337:Début 
192:Parent 
336:Insérer 
338:Insérer variable 
339:Types inclus 
340:Saisir le nom de la variable 

;Messages 
;------------ 
193:Structure introuvable. 
197:Le compilateur n'est pas prêt, essayez plus tard! 

199:Table ASCII 
;############### 
200:Copier comme chaîne 
201:Copier comme 'char' 
202:Copier en Hexadécimal 
203:Copier en Decimal 
;Messages 
;------------ 
204:Caractères interdits dans la chaîne! 

242:Configuration des outils 
;############### 
213:Aucun 
214:Ligne de commande : 
216:Parcourir 
217:Libellé du menu : 
218:Raccourci : 
219:Exécution invisible 
220:Attendre la fin de l'exécution 
221:Recharger la source après l'exécution dans 
222:un nouvel onglet 
223:l'onglet courant 
224:Cacher l'éditeur 
225:Options 
226:Ajouter 
227:Insérer 
228:Remplacer 
351:Séparateur 
230:Supprimer 
354:(In)visible 
231:Monter 
232:Descendre 
401:Nouveau 
229:Eléments du menu : 
243:Arguments : ( %PATH , %FILE , %TEMPFILE ) 
244:Répertoire de travail 
;Messages 
;------------ 
233:Aucun élément sélectionné ! 
234:L'élément du menu 
235:doit-il vraiment être supprimé ? 
236:Ligne de commande non saisie ! 
237:Libellé du menu non saisi ! 
238:Le libellé 
239:est déjà utilisé! 
240:Raccourci déjà utilisé : 
348:Vous ne pouvez pas supprimer des plugins ! 
349:Vous ne pouvez modifier que le nom et le raccourci des plugins ! 
353:Les outils intégrés sont protégés! 
400:Cet item est protégé 

346:Sélectionnez une sauvegarde... 
;################## 

248:A propos 
;#########
dmoc
Enthusiast
Enthusiast
Posts: 739
Joined: Sat Apr 26, 2003 12:40 am

Post by dmoc »

How do I create an English help file (chm) for jaPBe? I have tried DocMaker but it throws up errors.
GPI
PureBasic Expert
PureBasic Expert
Posts: 1394
Joined: Fri Apr 25, 2003 6:41 pm

Post by GPI »

dmoc wrote:How do I create an English help file (chm) for jaPBe? I have tried DocMaker but it throws up errors.
I don't know, i never create a chm. But when you have one: simple call it English.chm und put it in the language-folder.

And a english help-file is on the way...
Shannara
Addict
Addict
Posts: 1808
Joined: Thu Oct 30, 2003 11:19 pm
Location: Emerald Cove, Unformed

Post by Shannara »

Found a bug :) The Extends command is not supported in jaPBe. for example..


Structure myBox


EndStructure

Structure BigBox Extends MyBox


EndStructure

MyBox (in both instances) and BigBox is supposed to be the same color/font/style. They are not. It just makes things confusing. Also, the capitalization is lost :)


Just an FYI :) Looking foward to the next release! :)
freedimension
Enthusiast
Enthusiast
Posts: 613
Joined: Tue May 06, 2003 2:50 pm
Location: Germany
Contact:

Post by freedimension »

dmoc wrote:How do I create an English help file (chm) for jaPBe? I have tried DocMaker but it throws up errors.
Hi dmoc

I compiled the German version of the Help File with HTML-Maker, a freeware tool by M$. If it's too complicated (though I don't think so) you can send me your work and I will do the rest (leaving the credits to you of course). You could send it to me anyway, so one person does have them all together. I could also react faster on smaller changes than 2 persons ever would.

cu
freedimension
dmoc
Enthusiast
Enthusiast
Posts: 739
Joined: Sat Apr 26, 2003 12:40 am

Post by dmoc »

freefimension, thanks for the offer but I mistakenly thought the source files for jaPBe "help" was included with jaPBe and that it just needed to be compiled to a chm. This is not the case. Thanks anyway.
Shannara
Addict
Addict
Posts: 1808
Joined: Thu Oct 30, 2003 11:19 pm
Location: Emerald Cove, Unformed

Post by Shannara »

Found 2 more bugs with jaPBe.

#1 When using autogenerate declare files for projects, it takes more then 2 minutes to compile a simple project. As it stands now, it is still compiling.. and its been over 4 minutes. With the auto declare off it takes no more then a few seconds.

#2 There is a compiling bug with jaPBe if you have auto-declare on. It will not allow you to compile your EXE in any directory other then your source directory, annoying as heck, but japbe is still usable. (just cannot finish compiling).

I hope all three bugs are fixed with the next version of japbe :)
GPI
PureBasic Expert
PureBasic Expert
Posts: 1394
Joined: Fri Apr 25, 2003 6:41 pm

Post by GPI »

Shannara wrote:Found 2 more bugs with jaPBe.

#1 When using autogenerate declare files for projects, it takes more then 2 minutes to compile a simple project. As it stands now, it is still compiling.. and its been over 4 minutes. With the auto declare off it takes no more then a few seconds.

#2 There is a compiling bug with jaPBe if you have auto-declare on. It will not allow you to compile your EXE in any directory other then your source directory, annoying as heck, but japbe is still usable. (just cannot finish compiling).

I hope all three bugs are fixed with the next version of japbe :)
Can i have the code? I haven't this problems...
Post Reply