PureBasic 5.00 beta 2
Re: PureBasic 5.00 beta 2
Due to a lot of PC troubles, I was down and away for a few days,
I come back and what do I see
PB v5.0 is waiting for us...
I forget all my PC troubles write now ...
Thanks for all the new 3D stuff,
I love PB
Marc
I come back and what do I see
PB v5.0 is waiting for us...
I forget all my PC troubles write now ...
Thanks for all the new 3D stuff,
I love PB
Marc
- every professional was once an amateur - greetings from Pajottenland - Belgium -
PS: sorry for my english I speak flemish ...
PS: sorry for my english I speak flemish ...
Re: PureBasic 5.00 beta 2
Fantastic to finally see 5.00! Great work guys.
-
- 666
- Posts: 1033
- Joined: Mon Sep 01, 2003 2:33 pm
Re: PureBasic 5.00 beta 2
Nice one Fred and Timo and team I had no doubt that PB was going to go from strength to strength! Thanks very much for all of your efforts
Re: PureBasic 5.00 beta 2 -- Can`i initialize engine3d
What example are you trying to run?Zebuddi123 wrote:Hi to all
Error Can`t initialize engine 3d since installing pb 5 beta 2 even in 4.61 getting this error. have put engine3d.dll in working folder but still the same problem. although i don't normally touch 3d or games stuff when i have had a little play putting engine3d.dll in the current source code folder has always worked any ideas ?
Thanks Zebuddi.
PureBasic
- Zebuddi123
- Enthusiast
- Posts: 794
- Joined: Wed Feb 01, 2012 3:30 pm
- Location: Nottinghamshire UK
- Contact:
Re: PureBasic 5.00 beta 2
@dman
having problems with all the 3d examples from 4.61 - 5b2 the call to InitEngine3D() fails every time very strange. i`m just going to trace pb with procmon to investigate
Zebuddi.
Just traced PBDebugger.exe with procmon it shows call to Screen3DRequester.pb but nothing for Engine3d.dll which i thought should definaitly be there also the path its using to open engine3d.dll
??????
having problems with all the 3d examples from 4.61 - 5b2 the call to InitEngine3D() fails every time very strange. i`m just going to trace pb with procmon to investigate
Zebuddi.
Just traced PBDebugger.exe with procmon it shows call to Screen3DRequester.pb but nothing for Engine3d.dll which i thought should definaitly be there also the path its using to open engine3d.dll
??????
malleo, caput, bang. Ego, comprehendunt in tempore
Re: PureBasic 5.00 beta 2
it has perhaps nothing to do with your problem, but for information it is necessary to install the latest version of directx 9.0c
http://www.microsoft.com/en-us/download ... aspx?id=35
http://www.microsoft.com/en-us/download ... aspx?id=35
Please correct my english
http://purebasic.developpez.com/
http://purebasic.developpez.com/
- Andre
- PureBasic Team
- Posts: 2058
- Joined: Fri Apr 25, 2003 6:14 pm
- Location: Germany (Saxony, Deutscheinsiedel)
- Contact:
Re: PureBasic 5.00 beta 2
Very nice, that I now can copy & paste from Safari browser (e.g. code examples on the forum) directly to the PB IDE on MacOS!
This avoid the additional effort to post if first to "TextEdit" and then copy&paste it from there again...
This avoid the additional effort to post if first to "TextEdit" and then copy&paste it from there again...
- Zebuddi123
- Enthusiast
- Posts: 794
- Joined: Wed Feb 01, 2012 3:30 pm
- Location: Nottinghamshire UK
- Contact:
Re: PureBasic 5.00 beta 2
Hi comtois dx9 installed and i believe the dx7 files are included in the dx9 install.
I`m running avast internet security i used to use comodo internet security, sometimes comodo would block access to certain files, was wondering if avast is doing the same but cant find where avast says if it has any blocked files.
bad interface (only cause i dont know what im doing )
i have disabled all avast modules with no joy but service belonging to avast could still be blocking (had this type prob before)
but thanks for your replay anyway
Zebuddi.
Solved reinstalled 4.61 and 5b2 ( Engine3d.dll is 9.72mb ) defiantly wrong. now 2.26mb in 4.61 and 2.39mb in 5b2 can people compare please and let me know the sizes you have !!!
any ideas people ?
I`m running avast internet security i used to use comodo internet security, sometimes comodo would block access to certain files, was wondering if avast is doing the same but cant find where avast says if it has any blocked files.
bad interface (only cause i dont know what im doing )
i have disabled all avast modules with no joy but service belonging to avast could still be blocking (had this type prob before)
but thanks for your replay anyway
Zebuddi.
Solved reinstalled 4.61 and 5b2 ( Engine3d.dll is 9.72mb ) defiantly wrong. now 2.26mb in 4.61 and 2.39mb in 5b2 can people compare please and let me know the sizes you have !!!
any ideas people ?
Last edited by Zebuddi123 on Sat Sep 01, 2012 4:18 pm, edited 4 times in total.
malleo, caput, bang. Ego, comprehendunt in tempore
Re: PureBasic 5.00 beta 2
@Zebuddi123
Hmmm.... this is very strange, I use Avast and most of the 3D examples run fine, apart from the examples that need
a better graphics card.
Could that be your problem? most likely not.
Hmmm.... this is very strange, I use Avast and most of the 3D examples run fine, apart from the examples that need
a better graphics card.
Could that be your problem? most likely not.
PureBasic
- Zebuddi123
- Enthusiast
- Posts: 794
- Joined: Wed Feb 01, 2012 3:30 pm
- Location: Nottinghamshire UK
- Contact:
Re: PureBasic 5.00 beta 2
Noooo !!! q6600 quadcore, 4gb ddr3, nvidia 9800gt 1gb, as previous post it was a huge Engine3d.dll where from i dont know checked vith avast and clam av both virus free
and seems fine like a regular dll, no corruption though base address`s are different and the offset`s seem the same any guru`s have ideas please
Zebbudi.
and seems fine like a regular dll, no corruption though base address`s are different and the offset`s seem the same any guru`s have ideas please
Zebbudi.
malleo, caput, bang. Ego, comprehendunt in tempore
Re: PureBasic 5.00 beta 2
@Zebuddi123
Strange, remove all older version of purebasic , re-install the latest beta.
Try InitEngine(1) to activate the .log file, and post the file here via pastebin.
i think the bug is the interface between the chair and the keyboard
Strange, remove all older version of purebasic , re-install the latest beta.
Try InitEngine(1) to activate the .log file, and post the file here via pastebin.
i think the bug is the interface between the chair and the keyboard
Re: PureBasic 5.00 beta 2
Or you could comment out lines 18 - 21 and it 'should' work
i.e.
;CompilerIf Subsystem("OpenGL")
;CompilerElse
;CompilerError "Use opengl subsystem , shader is glsl."
;CompilerEndIf
i.e.
;CompilerIf Subsystem("OpenGL")
;CompilerElse
;CompilerError "Use opengl subsystem , shader is glsl."
;CompilerEndIf
PureBasic
- Zebuddi123
- Enthusiast
- Posts: 794
- Joined: Wed Feb 01, 2012 3:30 pm
- Location: Nottinghamshire UK
- Contact:
Re: PureBasic 5.00 beta 2
@G-Rom Absolutely a bug between the chair and keyboard it`s an embedded feature i`m afraid as i said 3d working it`s resolved was down to this large Engine3d.dll.
was just wondering if anyone had come across this 9+mb engine3d.dll ?
Zebuddi.
was just wondering if anyone had come across this 9+mb engine3d.dll ?
Zebuddi.
malleo, caput, bang. Ego, comprehendunt in tempore
Re: PureBasic 5.00 beta 2
5.00 b2 x86 :Zebuddi123 wrote: now 2.26mb in 4.61 and 2.39mb in 5b2 can people compare please and let me know the sizes you have !!!
2 507 264 Bytes (2.39 Mo)
You have the good size
Please correct my english
http://purebasic.developpez.com/
http://purebasic.developpez.com/